Dear colleagues,
what are applications where low voltage, variable frequency driven synchronous machines (both PMSMs and electrically excited) in the power range of 1 - 10 MW and rotational speed range of 100 - 400 rpm are suitable?
Dear Janne:
I think you could benefit from this valuable article about your topic at:
https://www.google.com/amp/s/hydroco.ca/generating-equipment/%3famp.
Also for example, you can check on the following, from TES VSETÍN s.r.o.
Jiráskova 691, 755 01 Vsetín, Czech Republic:
Small Hydropower Plants – GSH, GSV, GSP
Generators for small hydropower plants are distinguished by robust construction and excellent parameters with high efficiency. They are attractive, above all, due to the combination of high reliability and innovation that they feature. This results in an economically advantageous solution. Thanks to a new design of rotors with salient poles,the machines achieve high outputs up to 30,000 kVA. Our long experience ingenerator manufacturing has resulted in the production of ecologically clean energy in more than five hundred hydropower plants.
Wind – GSV, GSP
Synchronous generators have been optimized for outputs up to 30,000 kVA, they feature high efficiency and precise speed regulation. A new innovation is our generator with permanent magnets with outputs up to 4,000 kVA. Thanks to the progressive design, the machine is 30 % lighter than machines with a wound rotor. With excellent efficiency, easy installation and longer service intervals, the machine maximizes yield. The generators are optimally compatible with the mains; feeding is ensured with frequency converters.
Marine – GSH, GSV, GSP
These generators are suitable for use in the shipping industry: for tankers, supply ships, multi-purpose cargo ships and ferryboats. They are used to feed electrical networks, emergency supplies of special aggregates or for auxiliary drives. The machines are intended for individual or parallel operation.
Pilot exciters – BP
Special synchronous generators with permanent magnets, which are used for power supply of automatic voltage regulators of synchronous machines and other devices with suitable parameters. The maximum power of the pilot exciters is 3500VA. Speed range 0-1500 rpm. More information can be found in the enclosed pilot exciters datasheet.
Dear Janne:
I think you could benefit from this valuable article about your topic at:
https://www.google.com/amp/s/hydroco.ca/generating-equipment/%3famp.
Also for example, you can check on the following, from TES VSETÍN s.r.o.
Jiráskova 691, 755 01 Vsetín, Czech Republic:
Small Hydropower Plants – GSH, GSV, GSP
Generators for small hydropower plants are distinguished by robust construction and excellent parameters with high efficiency. They are attractive, above all, due to the combination of high reliability and innovation that they feature. This results in an economically advantageous solution. Thanks to a new design of rotors with salient poles,the machines achieve high outputs up to 30,000 kVA. Our long experience ingenerator manufacturing has resulted in the production of ecologically clean energy in more than five hundred hydropower plants.
Wind – GSV, GSP
Synchronous generators have been optimized for outputs up to 30,000 kVA, they feature high efficiency and precise speed regulation. A new innovation is our generator with permanent magnets with outputs up to 4,000 kVA. Thanks to the progressive design, the machine is 30 % lighter than machines with a wound rotor. With excellent efficiency, easy installation and longer service intervals, the machine maximizes yield. The generators are optimally compatible with the mains; feeding is ensured with frequency converters.
Marine – GSH, GSV, GSP
These generators are suitable for use in the shipping industry: for tankers, supply ships, multi-purpose cargo ships and ferryboats. They are used to feed electrical networks, emergency supplies of special aggregates or for auxiliary drives. The machines are intended for individual or parallel operation.
Pilot exciters – BP
Special synchronous generators with permanent magnets, which are used for power supply of automatic voltage regulators of synchronous machines and other devices with suitable parameters. The maximum power of the pilot exciters is 3500VA. Speed range 0-1500 rpm. More information can be found in the enclosed pilot exciters datasheet.
I hope it will be helpful ...
With my best regards ...
- Badges
- Science topic
- Similar topics
- Automotive Engineering
- Machines