Is it possible that nano-ceramics synthesised using 3D printing while lays are still fabricated?

3D printing is a process of making three dimensional solid objects from a digital file which object is created by laying down successive layers of material until the object is created

07 August 2019 7,016 1 View

Does anyone know, how can synthesis Cellulose Acetate Butyrate (CAB)?

CAB is similar for cellulose diacetate except that it is tougher, more durable and has better dimensional stability

09 October 2018 2,038 0 View

What are the effective parameters on the UV absorbance ?

UV spectroscopy is an important tool in analytical chemistry .When UV radiations are absorbed, this results to the excitation of the electrons from the ground state towards a higher energy state....

07 August 2018 8,093 7 View

Does anyone know, why the intensity of FTIR peaks changed while the functional groups are same?

Fourier Transform-Infrared Spectroscopy (FTIR) is an analytical technique used to identify organic (and in some cases inorganic) materials. In this study, nano silver coated on the fabric at...

07 August 2018 6,068 3 View

What are the reasons for pecks changing in FTIR test after coating on the fabric?

07 August 2018 3,575 0 View

How can I calculate weight percentage of production via hydrothermal method?

Two different salt were solved in the distilled water in room temperature. The final reaction was done by hydrothermal method. So, I want to calculate the weight percentage the production. Can...

07 August 2017 7,869 1 View

Does anyone know how I can prepare powder samples to measure contact angle?

I want to measure the contact angle of the nano metal oxide such as, Zn, Ag and Cu.

06 July 2017 316 7 View

No title

Mechanical alloying (MA) is a relatively novel method that has been successfully applied for materials, such as intermetallic compounds and transition metal carbides, which are difficult to...

06 July 2017 1,020 10 View

No title

02 March 2017 8,131 0 View

Does anyone know how we can measure density for a compound with different stoichiometry?

09 October 2015 3,429 2 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

How the parameters (such as Mw, Chemical bonds, polymer bland and so on) affect the mechanic property of polymer (such as storage, loss modulus) ?

Anyone can recommend any books on such topics? Thanks in advance.

02 March 2021 8,457 2 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

Why Austenite grains in steel show much more twinning than ferrite grains?

It is oftentimes said to be a distinctive metallographic trait that differentiates a fully austenitic and a fully felly ferritic steel without etching that might distinguish between two. Why...

02 March 2021 728 2 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

What are the new 2D nanomaterials were used for Silver nanoparticles stabilization?

In the stabilization of AgNPs are vital in current research interest. However, some of the 2D nano-materials like graphene oxide, MoS2, etc... previously used to stabilize it. But still they shown...

01 March 2021 2,207 3 View