Samples to study circular dichroism (chirality)?

I want to build a low-cost polarimeter to study circular dichroism (chirality). What type of samples can I use? I am looking for samples that can be found outside the laboratory.

01 March 2021 9,101 3 View

Which cell line should we use to perform biological dosimetry experiments?

We are preparing some experiments based on irradiating cells under different conditions in order to evaluate the effects in terms of DNA damage, genetic expression, etc. As our project is...

01 March 2021 3,355 3 View

RIA. How to measure?

When you use RIA, with a control the unknown sample with antibodies, you bare in mind the binding sites of the antibodies. However you still need to measure labelled antigen (radioactive) and not...

28 February 2021 2,133 3 View

Benefits of the 24 welled plate?

We have always used the 96 welled plate, the 48 welled plate but apparently there is much evidence on the 24 welled plate and above all its benefits.It states it is the same you would use on ELISA...

28 February 2021 1,149 1 View

Algorithms to filter corrective max and min from a set of data?

I've got this 5 year Direct Normal Irradiance data I downloaded from https://re.jrc.ec.europa.eu/. I ordered this by year and by every 24 hours because I need the DNI curve by max in summer, min...

17 February 2021 2,777 5 View

Flexibility of RNAseq?

When you use RNAseq I understand that it must follow certain conditions when you use it. One of them is the insertion of a polyA tail. The insertion of the polyA must include then...

05 February 2021 3,770 4 View

Is there an open source tool the measures the GRAVY index of a peptide incorporating the PTMs and unusual amino acids (e.g. hydroxyproline)?

Right now, I am using ProtParam to compute GRAVY index of peptides. However, some of my peptides are post-translationally modified, and contains unusual amino acids. I assume that ProtParam does...

29 January 2021 8,300 4 View

What type of spectral radiation has greater penetration on materials, UV or IR? What book or source do you recommend for information on this?

I need information concerning the penetration and reflection capacity of ultraviolet and infrared radiation wavelengths on different most common materials. Edit. Can somebody recommend a book to...

16 January 2021 8,051 6 View

Could be estimate or simulated the electrical properties of thin films obtained from new organo-metallic compounds?

In the context of synthesized organo-metallic compounds, I am interested in the formation of thin-films over silicon wafers. Among another characteristics to be investigated, electric properties...

13 January 2021 7,575 2 View

How long does the peptide cleavage cocktail last before it gets expired?

The cleavage cocktail is composed of Phenol/thioanisole/water/TFA/triisopropylsilane. I only prepare 10 mL cocktail per peptide but can the activity of the cocktail prepared at 100 mL last for a week?

10 January 2021 7,424 3 View

For gelatin coating for culturing HUVEC.Should the gelatin be made in sterile water or PBS? Do I need to autoclave the gelatin soln after making it ?

I want to use 0.1% gelatin. Should that be made in PBS or sterile water? Should I autoclave the gelatin soln after making it in water/PBS?

28 February 2021 274 2 View

The reason that the culture of white fungi Contamination with green mold(Trichoderma), the culture autoclave at121 for 15 min. What is it?

Is the period to autoclave not enough? The inoculation in a hood and flame and UV and alcohol.

27 February 2021 9,356 3 View

Does any one have experience with Autoclavable cell culture media (RPMI 1640/DMEM)? Does it work well?

12 February 2021 2,958 1 View

What recipe of homemade lenti-virus concentrator do you use?

My lab is using a lenti-X concentrator. And we are looking for a homemade recipe. I have tried this recipe....

08 February 2021 5,965 1 View

Does anyone knows about a comercial software to record pressure and temperature during reaction in an Autoclave?

Dear all: Currently I am working with polymerization reaction in a reactor. For this, I need to control temperature, pressure, agitation speed etc. For calculation of rate of polymerization, I...

07 February 2021 355 2 View

What makes yellow color appear in phosphorus sample after autoclave digestion?

I was using autoclave for digesting water samples for Total phosphorus measurement with ascorbic acid method. The autoclave was set to perform 2 hours digestion and around 121 Celsius degrees. I...

25 January 2021 206 3 View

Disposing Congo Red Agar?

Hi all, Hope you are well. My lab is planning to use some Congo red agar (0.01%) for Shigella flexneri, and we are wondering how do you dispose of the used agar plates. The Shigella contaminated...

13 January 2021 9,823 2 View

How can Sea water impact the hydrodynamic size of Nanoparticles differently than the same Sea water if it is autoclaved?

I am using the same sea water as autoclaved as well as non-autoclaved after adding the nanoparticle. I am getting different Hydrodynamic size for the same nanoparticle.

06 January 2021 3,184 3 View

Please share some research papers on the synthesis of Mn3O4 nanoparticles via Hydrothermal method by using Manganese(II) nitrate hydrate?

05 January 2021 9,040 4 View

How to get dry petri dishes in glass after wet sterilization?

Hi, I warping my plates with paper, later put them in the autoclave (use wet sterilization cycle) but still some plates are get wet after ends the cycle. How to get dry the petri dishes? and if...

13 December 2020 8,062 4 View