Shyam Lakshmanan

7 Questions 78 Answers 0 Followers

Questions related from Shyam Lakshmanan

GE is formed in palm oil at temperatures above 230C. How can we achieve lower levels without sacrificing the other oil quality parameters?

Glycidyl Esters are said to form from Diacyl glycerides when processed at deodorizing temperatures. Palm oil normally has to be degummed and bleached before it is deodorized. What would be the...

04 March 2021 9,374 1 View

How is MOSH and MOAH content in refined palm oil determined?

Is there a more direct method for determining the Mineral Oil Saturated Hydrocarbon content and the Mineral OIl Aromatic Hydrocarbon content in refined oils. The existing method seems to be quite...

04 March 2021 8,114 2 View

Interference on MOSH MOAH readings when Food Grade lubricants are used?

What is the content of MOSH/MOAH in food grade lubricants? Does the use of food grade lubricants have an impact on the analysis results for MOSH/MOAH in refined edible oils? We added several ppm...

04 March 2021 7,947 1 View

What is the typical MOSH and MOAH content in food grade lubricants?

With the call for lower MOSH and MOAH levels in edible oils, there is a push towards using Food Grade lubricants. What is the content of MOSH/MOAH in food grade lubricants?

04 March 2021 2,058 1 View

How can one obtain a better yield from Palm oil fractionation? Is 85% achievable on a PO IV of 53?

What would the cycle time be?

03 December 2014 8,506 3 View

3MCPD ester content in Palm oil products is of concern to the industry. How can one reduce it?

What changes need to be made to the process to reduce the 3MCPD content of Palm products.

03 December 2014 8,739 3 View

How can one use EFB and shell biomass as fuel in a furnace and does controlled burning to also produce activated carbon?

The Palm oil industry produces large amounts of biomass as fuel and burns up much of it as fuel for power and strange generation. How can one simultaneously produce activated carbon?

03 December 2014 7,412 3 View