6 Questions 4 Answers 0 Followers
Questions related from Shalin P Marathe
I have Friction stir welded blanks from AA 6061 T6. The blank thicknesses are 0.5, 1 and 1.6 mm. After welding, it has been observed that the joints are very brittle. I want to improve the...
07 July 2019 531 3 View
What is the difference between SCI Expanded journal and SCI Expanded (SciSearch) journal ? Some journals are indexed in SCI Expanded (SciSearch), what does that mean? Is there any difference in...
09 September 2018 8,548 2 View
During any forming operation sheet/blanks are subjected to the load and are required to take some shape. During such process, thinning and thickening of blank takes place. Suppose, i am forming a...
06 June 2018 7,007 2 View
This question is regarding the ABAQUS/Explicit. During the section assignment it has been observed that the software gives the option of "SHELL OFFSET" (see the attached image). it has several...
05 May 2018 3,610 2 View
Hi all ! I have modeled a geometry in a modeling software. Now i want to import the coordinates of that geometry in abaqus. Is it possible ? if yes than please guide for the same...
11 November 2017 752 2 View
During the simulation of FSW joints for tensile testing, how one can model the weld line different from base metals? As we know that there are zones like TMAZ, HAZ and WZ along with base metal...
05 May 2017 9,080 2 View
