Rinat Seidgazov

4 Questions 19 Answers 0 Followers

Questions related from Rinat Seidgazov

What part of the beam power is spent on evaporation during keyhole laser welding? How to prove it?

According to the estimates only about 1 percent of the beam power is expended on evaporation (up to 60 % is expended on thermal conductivity and about 40% on melting). On the other hand, there are...

11 November 2018 1,145 5 View

Why the welding depth increases with decreasing of surrounding pressure during laser welding of steel, but it conversely decreases in case of copper?

The question arose after reading this article: Lasers in Manufacturing Conference 2015 Influence of Ambient Pressure on Spatter Formation during Laser Welding of Copper. Andreas Heidera, Thomas...

12 December 2017 1,735 0 View

Laser welding simulation - physical or surrogate model? Why the surrogate model is masked as a physical one in reality?

To interpret the hydrodynamics of deep penetration welding, an evaporative model is usually used, taking into account the melt flow resulting from the action of high-pressure steam. However, the...

01 January 1970 9,291 3 View

How much welds it need to do for the designing of high quality laser welding technology without any pores using trial-and-error method of designing?

The laser welding of responsible products (shipbuilding, aerospace, nuclear industry, automobile industry, equipment for oil and gas industry, etc.) is associated with high requirements to the...

01 January 1970 906 3 View