6 Questions 6 Answers 0 Followers
Questions related from Raymon Ics
PVD system, when opening the oil diffusion pump, the measured value of the ion sensor fluctuates greatly at 9.0-1pa and 7.0-1pa, the system does not leak. cooling water 30 degrees. I was very...
05 April 2024 519 2 View
The source material is a ceramic glaze pattern,After cleaning and drying at 500 degrees for 8 hours. They are fed into a TiN PVD furnace, the target is 20 plasma sources! The plating furnace in...
17 June 2023 4,969 5 View
we coated titanium gold by sputtering method, recently the surface is very bad, maybe it's because the surface is not clean? soiled?
24 April 2023 5,426 1 View
Recently, after each coating, the plating cavity appears blue purple, we use Agron and N2 to cover the yellow color.
09 April 2023 6,727 4 View
why when vacuum heating. suction power of vacuum pump is reduced???Why heat the vacuum plating chamber? during heating to 150 degrees the value of the vacuum chamber is at 3.0x10-2 pa , when...
06 March 2023 7,983 2 View
We are coating 24k Gold on ceramics with TiN, the gold color is not beautiful with deep color, Gas ratio is 200sccm(Ar)/500sccm(N2)-(3min)/(5min).Is this ratio necessary. to tweak???Thank!!
25 January 2023 657 1 View
