11 Questions 7 Answers 0 Followers
Questions related from Rajesh Kumar Sharma
Please suggest a suitable software for the deconvolution of NMR spectroscopy. (Open source). Thanks in anticipation.
26 June 2023 9,506 2 View
Dear Researchers, Which is the Best and comparative easy XRD Rietveld analysis software among - MAUD, Profex, Highscore, Impact, GSAS-II and Full Prof? Thanks.
09 November 2021 6,669 2 View
Can any expert/researcher tell me about the process or Method to remove sintered glass phases from Platinum Crucible. It is very hard to remove as can be seen from the picture. Previously I was...
16 March 2021 9,113 2 View
How to remove the sintered material which has been fully stuck at the base of alumina crucible? It is synthesized as stone like material after sintering at 1400 deg C. Should any other kind of non...
29 October 2020 6,519 2 View
Is it necessary to beneficiating/treat the fertilizer industry waste (specifically- Phosphogypsum) to be used as primary feed kiln/raw material for the synthesis of Calcium sulfoaluminate-belite...
29 October 2020 1,777 3 View
What effect/how much effect will be there on grain growth when the size of raw materials decreases from 150 microns to 45 microns? Any referred research paper?
19 October 2020 7,495 4 View
What kind of crucible is suitable for the synthesis of cement; if the compacted pallet is being transformed into a liquid, at a temperature of 1500 deg C?
10 October 2020 3,666 6 View
Which method is more suitable to conduct the experimental investigation between CCD vs. BBD of Response surface methodology?
10 October 2020 9,934 3 View
How anionic and cationic surfactant influences the properties of foam expansion and foam capacity?
14 July 2020 9,250 0 View
What are different unwanted phases (apart from Alite, Belite, C3A and C4AF) that can be formed while synthesis of portland cement using wastes of calcium, silica and alumina oxide sources. How to...
01 January 1970 8,632 2 View
Can anyone give an idea about the most suitable software (viz. GEMSFITS) used to do the thermodynamic calculation to predict phases after hydration of cement; along with the link for manual to do...
01 January 1970 2,169 10 View
