14 Questions 24 Answers 0 Followers
Questions related from Qusay A. Al-Kaseasbeh
I'm modeling Concrete filled steel tube column, but contact properties do not work for me. please check the input file to get more information.
13 March 2017 10,027 11 View
Does anyone have any helpful information (Organised governing equations & subroutine files) about Two & Three surface models which are developed by Shen & Goto respectively? Regards, Qusay
11 March 2017 7,979 4 View
Hi, I'm modeling thin-walled column under axial loading and horizontal displacement as shown in attachment 1 using displacement control (Boundary conditions). I decide and input the horizontal...
27 October 2016 3,487 6 View
I'm trying to mesh one circular column into 3 sizes (top, middle, and bottom parts) by using Partition, seed each cell by different size, but some irregular mesh elements appeared even I used...
06 October 2016 7,793 6 View
I want to use the same geometry that I drew it in ABAQUS and import again in a different ABAQUS model (not copying). I'm trying with File-export to save it, but when I'm gonna import it again, it...
03 October 2016 5,963 4 View
Hi all, I'm trying to model this geometry (Fig. 5 in the attached file) using kinematic hardening in ABAQUS, and I have been stopped for unknown reason, Could you please guide me especially how to...
13 September 2016 10,069 3 View
Hello all, I'm gonna work on ABAQUS( Mainly dynamic modeling such wave propagation). Could you please share with me any useful documents to understand thoroughly? Thanks!
10 May 2016 2,523 2 View
In structural design methods, load factors were been identified based on probabilistic models. as example, we use 1.6 as factor load for live load and 1.2 for dead load, could anybody explain how...
07 February 2016 4,026 8 View
If I have a Nyquist graphs, is it possible to see the difference without make fitting? I mean which will be more corroded over than others. Thanks
19 September 2015 657 18 View
I have 3 coatings and my interest point is to investigate the weldment corrosion behavior under these coatings. I'm gonna use Potentiostat EIS with scribed coated samples since I'm focusing on...
04 September 2015 6,934 8 View
Hello all, I'm gonna ask the experts in electrochemical corrosion testing. when I get corrosion rate from electrochemcial test such as Tafel test or Rp/Ec trend, is that exactly the corrosion...
25 August 2015 1,802 25 View
I was running potentiodynamic test, while the test I got overload ( I overload and CA overload). based on Gamry maybe the surface area is too big so the potentiostat cannot measure the current,...
26 July 2015 6,162 4 View
After making sandblasting for steel, how could we keep the steel away from rusting?
16 July 2015 9,577 6 View
For experts in electrochemical testing I'm going to use potentiodynamic to get material corrosion behavior and Rp/Ec Trend to get corrosion rate plot . You know potentidynamic changes the...
15 July 2015 6,851 3 View
