8 Questions 8 Answers 0 Followers
Questions related from Piyush Jain
Hello all, We are looking for designing of shell and tube heat-exchanger to lower air temperature from ambient to -30deg C. Which MOC can we use in for this type of exchanger and can we use HTRI...
10 January 2020 7,941 1 View
Our team is working on the designing of heat exchanger and we find out that the flow regime for our case is Laminar. As per D. Q. kern pg 103. the Nuseelt number for laminar flow does not depends...
25 July 2017 4,552 12 View
Currently we are working upon high temperature reactions in CSTR reactor. However, due to high temperature charring is taking place in the heat exchanger. In order to avoid the charring in...
05 June 2017 9,491 3 View
We are dealing with a thixotropic fluid, with viscosity as high as 5000cp To ease it's flow in the high pressure pump, we are planning to use a pump that can decrease the viscosity to...
06 April 2017 6,792 5 View
Currently we are working on a system having solid particles. In order to see what minimum velocity is required to prevent the solids from settling in the horizontal pipeline, we are modelling the...
20 January 2017 6,261 2 View
In our process, instead of using any heat exchanger, we are planning to cool the process stream using ambient air by 150 deg C. It would be very helpful if someone can suggest guideline for the...
29 September 2016 5,300 6 View
While designing of control valve it is quite important to get the idea about the pressure at Vena Contracta, as whether the flow is choked or not depends very much on it.For the same calculation...
04 February 2016 9,846 1 View
For any control valve design, we need to consider the choke flow condition, this is done by calculating the max allowable pressure drop across the valve.In our case, the required pressure drop is...
22 January 2016 5,026 1 View
