10 Questions 16 Answers 0 Followers
Questions related from Nezisian Soltani
I modeled 2 part in abaqus and i want to until tensile stress between 2 surface is T, it transmit between 2 surface and up to T, to surface be separate of each other. Is there any model in...
05 May 2015 9,417 1 View
I need a .fil output in abaqus . I typed *node file in input file in abaqus to have a .fil. but when I import input file this warning appears. WARNING: The following keywords/parameters are not...
03 March 2015 3,724 3 View
I want to use of damage plasticity model in abaqus. when i use of 3D8R elements, the running complete easily, but when i use of 3D20R, abaqus cant solve the model. Is it necessary to use of 3D8R...
03 March 2015 6,049 4 View
I have used of tie constrain in abaqus between two surfaces but after analyzing, two nodes are separate, why?
01 January 2015 7,387 4 View
I modeled a 2D model in abaqus explicit. My analysis is quasi-static. When I put a hard contact between two edge, a divergence occur in my result. I can understand why this problem occurs. Time in...
01 January 2015 9,898 2 View
I have a 2D model in abaqus (Explicit) and analysis is quasi-static (with time 50). Material model is damage plasticity. I can see some crack in my model. But when I refine mesh, displacement will...
01 January 2015 6,527 3 View
I have a 2D model in abaqus and I want to apply the arch effect on my model by a function of pressure on downstream surface. How is the the function of arch effect? linear of another function?
12 December 2014 1,204 1 View
I modeled a cantilever in with many springs in downstream of it to model arch effect. but stiffness of my spring is too large and abaqus make an error. how can i solve this problem without reduce...
12 December 2014 3,210 1 View
I want to analyze my model in step 1 and by the new load analyze step 2 so that the stress of step 1 is there in step 2.
11 November 2014 5,546 4 View
I want to model a Dam in 8 stage.
11 November 2014 9,439 4 View
