Neeraj Kumar Bhoi

7 Questions 14 Answers 0 Followers

Questions related from Neeraj Kumar Bhoi

What should be the typical range of thickness of silicon carbide plate for the effective use as microwave susceptor?

For hybrid microwave heating what should be the range of silicon carbide plate which can perform well in heating and melting process. Can we use 15mm to 20mm thick silicon carbide plate as...

11 November 2018 7,689 2 View

Which Software can be used for the simulation of the Sintering Behaviour of Metal Matrix Composite ?

How to simulate and model the Sintering behavior of the Metal Matrix Composite Material in different Processing Techniques (i.e. Conventional, Microwave and Hybrid Mode) ?

07 July 2018 4,529 2 View

How can we calculate the elastic compliance value of the Al2O3 nano-particle?

I've the XRD data of Al2O3 nano-particle. For the Anisotropy behaviour how we can calculate the elastic complaince value of the particles from the XRD data.

05 May 2018 5,496 3 View

Could someone help me with MPIF Standard 10: “Tension Test Specimens for Pressed and Sintered Metal Powders”,?

Please upload the file if available MPIF Standard 10: “Tension Test Specimens for Pressed and Sintered Metal Powders”, Standard Test Methods for Metal Powders and Powder Metallurgy Products, Metal...

01 January 2018 6,954 0 View

What is the significant of micro and macro hardness?

For metal matrix composite material (Al matrix composites) what is the importance of measuring micro and macro hardness after final processing of material?

11 November 2017 7,853 6 View

Addition of alloying element during machining gives better surface quality Why ?

Why during machining of light weight or soft material the addition of alloying elements provides good surface finish as compared to base material (Pure form of metal).

11 November 2017 8,435 5 View

Why is the rate of reaction increased when magnesium is powdered rather than in solid form?

why chemical stability of magnesium in powder is less

10 October 2017 4,055 2 View