8 Questions 5 Answers 0 Followers
Questions related from Musfique Ahmed
As part of my ongoing project, I am trying to examine the biogas production through anaerobic digestion of vegetable oil. Due to the oil layer formation in the mixture, I doubt that all the...
23 August 2021 5,421 5 View
I have found different equipments in literature to measure the magnetization of solid samples. But, most of them seem to require big set-up or expensive. Can anyone suggest me some simple...
25 October 2018 712 6 View
I can see in literature that very high COD removal is observed with high COD/SO4 ratio where theoretically only 0.67 or lower ratio should attain complete organic oxidation. I couldn't find a...
24 May 2018 1,791 0 View
I need to measure Total S for the sludge particles of my reactor? Can anyone give me some suggestions for doing that? I have looked in to the standard method, but it doesn't explain anything on...
09 May 2018 2,599 3 View
Hi, I want to know how I can measure the concentration of sulfate and iron of the anaerobic sludge accurately? Generally I use atomic absorption spectroscopy (AAS) for total iron measurement and...
02 March 2018 7,290 3 View
Hi, I have been working on ferric reduction process in my small bench-scale anaerobic bioreactor. I have measured the COD, sulfate, iron of my influent and effluent in regular interval. Also,...
15 November 2016 3,432 2 View
I want to use synthetic wastewater with COD of around 300-400 mg/L for my lab-scale anaerobic treatment process. I'll be needed to use about 4 liter of synthetic wastewater to run the system. In...
12 January 2016 2,320 6 View
I need to design the pump flow rate for my bioreactor. I have the influent flow rate and head, now I need to set the RPM of the pump that will take the influent from the mixing basin to the...
10 January 2016 6,313 6 View
