Md. Faruk Hossain

8 Questions 2 Answers 0 Followers

Questions related from Md. Faruk Hossain

Can anyone provide a SILVACO ATLAS simulation code (in DeckBuild environment) for studying the effect of hot carrier in solar cell?

I am working with III-V solar cell. I am very much interested to study the effect of hot carrier in III-V solar cell. So, I need a simulation code to understand effect. I will be very grateful if...

28 July 2022 2,225 0 View

What is the peak position[°2Theta] of CoO(121) in XRD?

I am working with e-beam evaporated Co/TiO2 multilayer thin film on glass substrate. I got a peak at 33 [°2Theta], but I can not identify the element/composition for what I can get this peak.

24 December 2017 6,606 3 View

What is the relation between conductivity and optical band gap of thin film?

In case of TiO2 thin film it is seen that conductivity is decreased with increasing optical band gap. Is it possible?

07 December 2017 7,835 12 View

Why transmittance of thin film decreases with increasing film thickness?

I studied e-beam evaporated Co, TiO2 and Co/TiO2 thin film. In all cases transmittance of thin film decreases with increasing film thickness. What is the reason?

06 December 2017 205 3 View

What represent the peak intensity and peak width in XRD image ?

It is important to know the answer of this basic question.

17 November 2017 6,347 5 View

What represent the peak position 33.0369 degree[2theta] in XRD image?

I have the following data. But I can not explain these properly.

30 October 2017 5,462 7 View

Why grain size is decreased when e-beam evaporated Co/TiO2 multilayer thin film is annealed at 500 degree celsius than the as-deposited one?

I have no idea.

18 October 2017 1,163 3 View

What's the reason of decreasing the conductivity with increasing open air annealed temperature in e-beam evaporated Co/TiO2 multilayer thin film?

This may be due to incorporation of oxygen in the film.

17 October 2017 2,881 3 View