7 Questions 4 Answers 0 Followers
Questions related from Kamilu Alabi Sanusi
In my model the grid active power was able to track the step change in virtual mechanical input if connected to stiff grid, but it does not while operated in island mode. Please what could be the...
02 June 2023 2,844 0 View
Grid Inertia is an impending problem if the traditional power systems are decommissioned and replaced with inverter based generation according to some literature. Please, can't this problems be...
12 October 2021 3,989 3 View
Connection of output controlled DC/DC converter to my Wind turbine system causes so much oscillation in the PMSG parameters (like Te. Pm, Wr) at steady state. How can I correct this?
28 November 2014 4,695 2 View
In the course of trying to reduce the THD of PMSG wind turbine system using LC filters at the grid, it seriously affects all other parameter responses e.g Te, Wm, Pm, etc and also seriously...
27 November 2014 5,288 3 View
How do I implement the isolation of auxiliary winding after the motor (single phase split phase) has reached 75% of the rated speed in Simulink block?
07 February 2014 1,833 0 View
What could be the reason for this distortion and the unsymmetrical nature of the waveform measured on the filter capacitor of LCL filter of grid connected inverter? The voltage at the inverter...
01 January 1970 8,487 3 View
A complex power system with N generators was reduced to the internal nodes. The magnitude of the internal voltage behind the stator reactances (E1, E2....En) are also specfied. The parameters of...
01 January 1970 8,535 1 View
