How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

Does the power law behavior can be approximated with Gaussians?

In epidemiology, earthquakes, tokamak disruptions etc., there is possibility of approximations with the sequence of Gaussians and with the appropriate risks ( see my papers in Journal of Fusion...

26 January 2021 5,411 5 View

Does multivalued logic is necessary for artificial intelligence?

Fuzzy logic is multivalued. Does the multivalued logic is necessary for artificial intelligence?

26 November 2020 5,572 6 View

How to work with diversity indexes data while working with aleatory transects inside an area?

Hello! I've used the aleatory transect methodology to survey for mushrooms in six different areas. We've done 4 samples (transects) in which area along 4 months , one per month. I've already...

07 April 2020 9,664 3 View

Does the trend against Machine Learning theory is OK?

In last time there is a trend against Machine Learning ( ML) theory because ML is based mainly on data ( statistics ) and less on physics. Does it is OK.

29 November 2019 9,461 2 View

Variational calculus in curved spaces

Could anyone indicate me a good and simple material that deals with methods for variational calculus in curved spaces? (It does not have to be, necessarily, basic at the level of a General...

08 July 2017 6,159 6 View

Is it possible to model XFEM elements on Abaqus without using damage initiation/evolution for traction separation laws?

I am modeling in Abaqus a metal plate subjected to tension (CT), with an existing crack surface, using XFEM technique. I need to perform cyclic analysis so I need to assign hysteretic response to...

09 May 2017 2,475 5 View

What is a optimal value for error in residuals for cyclic direct analysis in Abaqus?

As one can see from Abaqus Manual (http://130.149.89.49:2080/v6.7/books/usb/default.htm?startat=pt03ch07s02abo09.html#usb-anl-aconvergeintro), the default residual error for the increment...

07 May 2017 803 6 View

How to check if the assigned behaviour of a material (Abaqus) is right?

I am modeling 3D CT specimen on Abaqus. The assigned material is elastic-plastic and damage is defined by separation laws. I tried to check in the results if the elements behaviour is the one I...

03 May 2017 2,934 5 View

What is the most Operating System (OS) which can be INSTALL on Tiny hard devices like Raspberry Pi (RPi) hardware ?

I'm targeting to deploy a mesh network and manually configure MANET routing protocols. I'm preparing scenarios, architectures, and hard devices needed to do that. Are there some step-by-step...

03 March 2021 1,931 5 View

Looking for Materials with high thermal expansion coefficient and high temperature resistance?

03 March 2021 8,272 1 View

Can we classify HV and LV lines based on line length?

I have dataset which shows the length of power lines. I need to classify the lines based on the line length. Is there a rule to classify the High voltage (HV) and low voltage (LV) lines based on...

03 March 2021 4,116 4 View

Waters 2707 HPLC autosampler problem?

I am using a 2707 waters HPLC device. When I try to inject a sample, it says missing plate or rack. I changed the needle and calibrated its position but I still get the same problem. I even get...

02 March 2021 1,408 1 View

Why almost every element would be metallized in sufficiently high pressure and low temperature?

(This statement is from wikipedia, BTW). What is so special about metallic bond that is limiting high-P low-T state of a matter (as long as individual atoms exist, not white dwarf of neutron star...

02 March 2021 3,309 2 View

Does anyone know HRM channel in a 2 plex QIAGEN Rotor- Gene Q qPCR can be used as a separate channel?

I am going to have 3 different probes in my qPCR work that I am going to do. But I realized that the machine we have in the lab is a Rotor-Gene Q 2plex HRM Platform, saying it has green, yellow,...

01 March 2021 8,544 1 View

How can I integrate a routing protocol in a tiny device (e.g. Raspberry Pi)?

Hi Community, I'm facing the issue of integration/compiling a new routing protocol in a WSN simulator. The final goal is to successfully add, configure this routing protocol in hardware devices...

01 March 2021 9,332 6 View

I have designed reflectarray element and feeding it though Horn Antenna on HFSS. After full wave simulation, I am not getting desired results?

I have designed reflectarray element to generate OAM beams at 5.8GHz and feeding it though Horn Antenna on HFSS. After full wave simulation, i am not getting desired results i.e Radiation pattern...

01 March 2021 9,701 5 View

Where can I find atmospheric measurement profiles (temperature, density, etc.) between 300-800 km altitude?

I am investigating thermospheric mass density profiles between 300-800 km altitude. I would like to compare the variability with other parameters, including temperature, electron content,...

01 March 2021 5,902 3 View

Any research papers for extraction of nutrient deprivation on macroalgae? Analysed by HPLC-UV and GC/MS. Possibly from macroalgae genus Rhizoclonium?

I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...

28 February 2021 6,477 1 View