I'd like to start PBL for undergraduate and graduate students in IRAN SSP research center, however we have been doing this work about 2 years. This center like to collaborate with researchers, so please guide us in this way.

Thanks 

What type of collaboration you are looking for?

I am interested. I read lots of your article and feel that it is a great opportunity to collaborate with you. I can guide undergraduate and post graduate students with the usefulness of SimMechanics and its usage in robotics, grasping and manipulation

For didactic equipment please look at the WEB site of the Festo Didactic. They propose a lot of didactic platform oriented to Mechatronic and Control Systems (Factory Automation and Process Automation). I think, with the local representant (http://www.festo.ir/) you can have a good cooperation.in this domain.

http://www.festo-didactic.com/int-en/learning-systems/?fbid=aW50LmVuLjU1Ny4xNy4xOS4zNDMz

Dear Maki

IRAN SSP group is a research based center. in this center we register students (undergraduate or postgraduate), defined projects, training project (based on PBL), supervising the project to get objectives and solve the problem statements and finally extract some paper from project. After that our student learn:

.How to do research?

.How to writing scientific papers?

. How to solve problem statements?

Most of our students can to get scholarship from world class university.

So we would like to do this work in the world, based on researchers like you, if you also like to work in this research group.

Best Regards

Dear Dr. Hasan

Thank's for your attention.

IRAN SSP group is a research based center. in this center we register students (undergraduate or postgraduate), defined projects, training project (based on PBL), supervising the project to get objectives and solve the problem statements and finally extract some paper from project. After that our student learn:

.How to do research?

.How to writing scientific papers?

. How to solve problem statements?

Most of our students can to get scholarship from world class university.

So we would like to do this work in the world, based on researchers like you, if you also like to work in this research group.

Best Regards

Dear colleague,

We need more information about this project. Our team had a lot of experience iin this field. 

Dear Luciana

IRAN SSP group is a research based center. in this center we register some students (undergraduate or postgraduate), after that defined a new projects (it's related to mechatronics) and then training all parts of project (based on PBL) (for example; intro to MATLAB, system modeling, linear and nonlinear control design , artificial intelligence and .......) after that supervising the project to get objectives and solve the problem statements and finally extract some papers from project. in this program  our student know:

.How to do research?

.How to writing scientific papers?

. How to solve problem statements?

Most of our students can to get scholarship from world class university.

So we would like to do this work in the world, based on researchers like you, if you also like to work in this research group.

Best Regards

Dear Professor Farzin Piltan

I liked the way you want to impart knowledge to you students. I am interested in collaboration. My field of interest is·nonlinear controls. I would like to know, how can I contribute in your setup.

Best Regards 

Dear colleague

I am interested and feel that it is a great opportunity to collaborate with you.

Dear Farzin,

I am interested in collaboration and very happy to help. You are also most welcome to exchange knowledge, knowledge transfer and if possible you can contribute to our established journal of Robotics and Mechatronics.

with best regards,

MS

Dear colleague,

I'm teaching Automatic Control and Robotics in Bachelor  of Industrial Engineering at the University of Almeria. I'm interested in the collaboration. What's your idea for our contribution?.

Best regards.

Im Msc student of Mechanical engineering (Mechateronic) . I would be glad if I could give you a hand.

I am a professor in the area of Automatic Control Engineering and Mechatronics. I am interested in collaboration.

I would be pleased to participate. Emmanuel

Dear Farzin,

We have been using project-based learning in Mechatronics and related courses - I can concur, first hand, that the approach has several very positive features - and will be glad to help. As a starting point, you could select a small-size pilot project and establish  some key options, e.g. main learning objective, size of student teams, teaching support, cost per learner etc.

Regards,

Giorgos

I would be pleased to participate.

When do we plan to begin ?

Dear Farzin,

I have mentored some students to participate in the RoboCup Junior competition. I'd be glad to help!

Felipe.

Dear Farzin,

I am teching an Introduction course in Robotics at Bachelor level at Department of Informatics, University of Oslo. I am interrested in learning more from this and participate in the project.

How to proceed?

Regards

Ole Jakob Elle

Yes please.

yes please

Yes, I am interested in this collaboration project. I am teaching Digital Control and System Identification at engineers school, and I would like to share ideas about applications of Control methods for Microelectronics and Mechatronics applications for students project.

Dear Alina;

According to the previous request related to PBL (Project based learning) collaboration. I am head of Mechatronics, Intelligent System and Robotics Laboratory, Iranian Institute of Advance Science and Technology (IRAN SSP), Feb 2009 to date.

Iranian center of Advance Science and Technology (IRAN SSP) is one of the independent research centers specializing in research and training across of Control and Automation, Electrical and Electronic Engineering, and Mechatronics & Robotics in Iran. At IRAN SSP research center, we are united and energized by one mission to discover and develop innovative engineering methodology that solve the most important challenges in field of advance science and technology. The IRAN SSP Center of Development Research and Training is instead to fill a long standing void in applied engineering by linking the training a development function one side and policy research on the other. This center divided into two main units:

• Education unit

• Research and Development unit

In this center I have two responsibilities: the first one is related to research center and the second one is related to education unit.

Due to head of Mechatronics, Intelligent System and Robotics Laboratory, I should to offer industrial expertise and strengths in electrical and computer engineering complemented with a passion for research and development with a concentration in analysis of dynamical systems and design of modern/intelligent controllers. In addition, I am led of team to design and build of intelligent controller for robot and development of software based on FPGA, team supervisor, to design and implement robust controller for internal combustion engine to improve the system performance, team leader and advisor of intelligent robust control of flexible robot with application to surgical industry, and led of team to design micro-based controller for spherical motor and development of system controller based on MATLAB and FPGA. Thrive on finding optimum solutions to problems. A good eye for identifying interesting areas for investigation, creativity to generate compelling new concepts, and the ability to quickly test and express concepts in the form of functional prototypes.

According to improve the educational unit, creating Project-based learning educational method in IRAN SSP Education unit and collaborate effectively with cross-functional teams, other disciplines, and students.

From 2011 to date our researcher have been doing 4 project as follows:

(1) Led of team to design and build of intelligent controller for robot and development of software based on FPGA and published about 51 Papers in this field since 2011 to date.

(2) Team supervisor, to design and implement robust controller for internal combustion engine to improve the system performance and published about 17 Journal papers since 2011 to date.

(3) Team leader and advisor of intelligent robust control of flexible robot with application to surgical industry and published about 31 journal papers in this field since 2012 to date.

(4) Led of team to design micro-based controller for spherical motor and development of system controller based on MATLAB and FPGA and published about 7 journal papers in this field since 2014 to date.

So if you also would like to collaborate with this center, please send your academic CV to me ([email protected]) after that we can add your name in IRAN SSP website. To improve our research rank this center wants to collaborate with MECS PRESS publisher to create a new journal related to control and new technologies so would be pleasure to add your name in the editorial board.

To have more information please follow the below link:

http://iranssp.com/english/

Regards

FARZIN PILTAN