Normally metal dusting temperatures are about 600-800°C but, can I have metal dusting corrosion about 400°C?
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Reference dose and Maximum acceptable concentrations HMs
03 August 2024 8,230 4 View
In general, when performing a Tafel analysis for corrosion resistance measurements, a line voltage scan is performed from say -250 to +250 mV vs. OCV at low scan speed around 0.125 mV/s. However,...
25 July 2024 7,982 3 View
I have immunized BalB/C mice with a protein using the intradermal (ID) method with Complete Freund's Adjuvant (CFA) and Incomplete Freund's Adjuvant (IFA), following a 14-day interval and three...
22 July 2024 9,160 2 View
I am looking to purchase a photography kit for onsite metallurgical investigations, such as capturing photos of worn areas, hot tears, cold tears etc. Could anyone suggest me a good...
22 July 2024 3,490 2 View
Dear all, We are producing activated carbon from hazelnut shells but have an issue about the dust of the a.c. granules also known as the dust film on granules. Linear vibrating seives doesn't do...
11 July 2024 9,782 2 View
Would anyone be interested in collaborating on corrosion?
07 July 2024 4,726 2 View
Mine is sitting here: http://openkan.org/DLpiecewiseCPP.html I wish to see someone else's.
06 July 2024 9,974 1 View
we need surface area, corrosion current, equivalent weight and density of the metal involved for corrosion rate calculation in mm/year (lets say). For dissimilar metal welds, how can we measure...
30 June 2024 5,943 2 View
Object-Oriented Programming
29 June 2024 4,877 12 View