Please find the links and attachments.
"FRESTIMATE command creates some temporary variables in MATLAB workspace and these variables seem to disappear before the simulation. This is most likely due to calling a command such as "clear all" in a model callback function such as "InitFcn". Please make sure that MATLAB workspace is not cleared in model callback functions.''
What does this mean?
Hi Muhammed,
you have a 'clear' command in the InitFcn of your model. Follow this path: File->Model Properties->Callbacks->Model callbacks->InitFcn, and delete the 'clear' command. This should eliminate your error.
Best regards,
Raúl Sarrias-Mena.
Hi Muhammed,
you have a 'clear' command in the InitFcn of your model. Follow this path: File->Model Properties->Callbacks->Model callbacks->InitFcn, and delete the 'clear' command. This should eliminate your error.
Best regards,
Raúl Sarrias-Mena.
Please refer to these articles:
https://www.researchgate.net/publication/313576646_From_PID_to_Nonlinear_State_Error_Feedback_Controller
https://www.researchgate.net/publication/312046377_Improved_Sliding_Mode_Nonlinear_Extended_State_Observer_based_Active_Disturbance_Rejection_Control_for_Uncertain_Systems_with_Unknown_Total_Disturbance
https://www.researchgate.net/publication/309655805_On_the_Improved_Nonlinear_Tracking_Differentiator_based_Nonlinear_PID_Controller_Design
Article From PID to Nonlinear State Error Feedback Controller
Article Improved Sliding Mode Nonlinear Extended State Observer base...
Article On the Improved Nonlinear Tracking Differentiator based Nonl...
- Badges
- Science topic