Which one is causing stress in rice, aerobic or anaerobic conditions? or both?

We know from the literature that rice plant has evolved different mechanisms to tolerate hypoxic stress. However, as rice normally grows under hypoxic conditions (during germination and seedling...

05 September 2020 8,220 5 View

Which statistical significance test to use for siRNA based knockdown assay? Is ANOVA-(one way) good enough for this experiment?

We performed the siRNA based knockdown assay with 10 different siRNAs and each siRNA with three different concentrations (0.1, 0.5, 1 nM) and repeated three times in triplicates (3-wells) each...

10 October 2017 1,502 3 View

What are different procedures to find validity of scales?

as i have constructed a psychological tool and have collected data, what is the procedure to find the validity of the tool

03 April 2016 5,367 3 View

How to score a likert Scale?

i have developed a scale, i want to know how to score responses of each item. what is the procedure to decide whether we have to start from 0 or 1 for each item.

29 February 2016 4,455 75 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

LOAD DISPLACEMENT CURVES Stiffness increasing in ANSYS non linear analysis. HOW CAN I CORRECT IT?

Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...

01 March 2021 9,911 3 View

How relevant is Mini slump cone?

for all the rheology researchers, my question is, how relevant is a mini slump cone (smaller than a standard 50 cent rheometer). currently based on testing, the thickness of slumped material is...

26 February 2021 3,668 1 View

Stress/strain tensors decomposition ???

25 February 2021 6,760 1 View

How to reduce residual stresses in MD simulation?

I am working on a preparation of representative polymeric structures of some popular polymers, such as polyimide or PTFE for MD simulation, during which a single nitrogen or oxygen atom will be...

24 February 2021 8,105 3 View

Suggestions for occupational stress surveys?

I am currently writing a masters thesis on reasons for occupational stress in the early childhood classroom, and want to include a short survey assessing participants work-related stress levels. I...

24 February 2021 8,678 2 View

How to formulate Energy minimization in Molecular dynamics simulation for alloys using meam potential?

during MD simulation, the atoms are not moving as per required. The problem (as per my observation) lies in energy minimization technique. upon application of tensile strain in x or y direction,...

22 February 2021 380 5 View

The most suitable method to calculate the stress intensity factor in the presence of contact between the crack lips?

I'm trying to study cracked structures under a compressive load taking into account contact between the crack lips. I would like to know if the method of extrapolation by displacement remains...

21 February 2021 8,694 4 View

How to model rupture in geogrid in abaqus?

Hi researchers I wanna model tensile test on geogrid in abaqus, so I added displacement to one side of geogrid and the other side of geogrid is constrained completely, everything seems normal but...

19 February 2021 2,195 2 View

How to assign two different material/section properties in Abaqus(UMAT)?

Hi everyone, I am conducting a non-linear multi-layer pavement structure analysis which is a stress-dependent. So far, I am able to define the nonlinearity for one soil layer for its resilient...

11 February 2021 9,607 3 View