Which synchronization technique is most suitable for a (ieee 802.15.4) zigbee receiver?

More Rakeshsharma Sugavanam's questions See All

Anyone please let me know how to define injection pressure in plain orifice atomizer model in fluent?

I am trying to simulate diesel spray injection in constant volume chamber. I am using 2D axi-symmetric model with DPM. I understand from atomizer model theory that injection pressure is essential...

16 December 2017 8,881 3 View

Is there any radar system implementation done in C?

I am doing research in radar.For that sake I need details regarding how and what are the available implementations of radar concepts in C programming language

07 January 2015 2,160 2 View

For PC-3 cell line. How long before irradiation do I have to synchronize my cells to G0/G1?

I am trying to do a clonogenic assay for PC-3 after irradiation. I have to synchronize my cells by serum starvation but there's a optimal time I have to do that before irradiation. been looking in...

09 February 2021 9,480 1 View

Grid connected inverter using virtual synchronous machine?

Hi everybody, currently, I am working on the grid-connected inverter. I want to make my grid-connected PV system a PLL-less system. I have studied some reachers are implementing a virtual...

07 February 2021 6,078 2 View

How to choose mouse cell line to work on?

Hey, I am looking to start working on mouse cell line for some genomics experiments. I have the following requirements: 1) Normal chromosomes composition. 2) Possible to transfect. 3) Possible to...

03 January 2021 4,387 2 View

Why is emotiv epoch+ contact quality 0% ?

I am trying to use new emotiv epoch+ headset which was bought in 2018. I am having half of the electrode as green Like this picture. But my question is why the over all contact quality is 0%...

17 December 2020 9,614 2 View

What are differences between Zigbee and Xbee Radios ?

Zigbee and Xbee are RF modules used in mesh wireless sensor networks. The price of Xbee modules are almost twice as lesser than that of Zigbee modules. is there any unseen drawbacks over the...

29 November 2020 3,741 4 View

What is the degree or extent to which the person conforms to the requirements and needs of the human being?

It requires conformity to human requirements and needs, The existence of a familiar product object that has a meaning or substance. And when excellence and creativity are an inherent...

04 October 2020 9,764 1 View

Need of Time Synchronization for UAV or fast moving vehicles while we have atomic clocks?

Why there is still a need to have time or clock synchronization in Ad hoc wireless networks especially UAVs or VANETS when we have atomic clocks. As atomic clocks are soo accurate that they lost...

16 September 2020 2,755 1 View

How to build a Matlab simulation for the network with the reaction diffusion term?

I was trying to realize the simulation of the paper, namely Adaptive Synchronization of Reaction-Diffusion Neural Networks and Its Application. I used Simulink for simulation, but the...

05 August 2020 8,571 1 View

How to calculate the Tm for a synchronous machine in simscape?

I want to control the speed of the synchronous motor .Firstly i used the three phase rectifier and output is fed to the spwm inverter ,and that output is fed to the synchronous motor, in...

05 August 2020 4,750 3 View

Synchronization between inertial measurement unit and motion capture system or force plate .. is it possible?

Hello All I'm trying to synchronize imu sensor with the Motion Capture system. Is this possible? If so, how? thanks for answering Alireza

19 July 2020 282 2 View

Zeydin Pala

There is a good paper which written by Dennis Cox, Emir Jovanov, and Aleksandar Milenkovic on Time Synchronization for ZigBee Networks:

Rakeshsharma Sugavanam

Thank you sir..

Adnène Arbi

Dear Rakeshsharma,

we can used the synchronization by impulsive control.

Dear Adnène Arbi,

Did you apply this scheme(Generlized synchronization via impulsive control) to zigbee physical layer (that is ieee 802.15.4 systems)