Which proxy is used to determine humidity?

More M.C. Manoj's questions See All

Can anyone provide the Support vector regression code structure of LIBSVM MATLAB or python ?

Please, if Gaussian Parameter optimization is possible in this code structure

28 February 2021 278 3 View

Is there any solar electric power plant having the concentrated photovoltaic modules?

The solar photovoltaic (PV) power plant uses commercial (non-concentrated) PV modules which are quite simple in design and reliable. They can work on fixed orientation and don't need the moving...

16 February 2021 3,796 9 View

Use of Sine voltage source in Electrical circuit with frequency domain study in COMSOL?

Dear Sir/Madam I want to use Sine voltage as a source in an RLC circuit. I want to study the driving point impedance with frequency sweep. But when I use sine voltage, I get an error like The DAE...

13 January 2021 9,826 5 View

Low value of Cd for Flow Past a Square Cylinder Simulation?

Hi everyone, Happy New Year! I am carrying out a Simulation for Flow Past a Square Cylinder. I am using Ansys Fluent. I get a very low value of Cd in the simulation. The solution converges but...

03 January 2021 4,389 3 View

How do I turn off the wall function for k-w SST simulation in Ansys Fluent?

I am using a very fine mesh (D/1000). Since I cannot find an option to turn off the wall function in Fluent GUI, could you please let me know how I can turn it off? From some forum I got to know...

21 December 2020 9,186 15 View

How to find Inverse Laplace of a large matrix in MATLAB?

I am trying to find out the inverse Laplace transform of the state transition matrix obtained using inv(S*I-A). Where I is the identity matrix, and A is a state-space matrix(24x24 matrix). I have...

21 December 2020 7,041 3 View

Why do I get Floating Point Error! on simulating with very fine mesh using k-w SST model in Ansys Fluent?

Hi everyone, any insight is appreciated. I am simulating with a D/1000 [first boundary layer height] mesh the flow past a square cylinder (inside a Circular domain). For Coarser mesh, I had no...

21 December 2020 5,438 10 View

I have rat dose of my formulation , how can I calculate mouse dose of same formulation using rat using rat dose?

Dose conversion from rat to mouse?

23 November 2020 1,807 3 View

What are the names of glasses used in the solar panels?

For my research purpose, I need the name and optical properties of the glass used on the front surface of the solar panel. Can someone provide me the aforementioned data with valid references? Is...

22 October 2020 9,714 9 View

In Abaqus, how to give stress field data from an output of a model to a new model as an input field having the same part?

I have 2 models where the first model is a subpart of the second one. The components of the subpart have the same mesh and geometry in both the models. I have performed stress analysis on the...

18 October 2020 9,256 5 View

Gas sensor response and recovery time independant of flow rate and chamber volume?

I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...

26 February 2021 1,511 3 View

What are the saturated salt solutions that can give specific relative humidity of 35%, 65% and 95% for conditioning wood specimens?

Due to the unavailability of climate rooms, I want to carry out an experiment that require the use of certain saturated salt solutions especially those that can condition the wood specimen to 35%,...

25 February 2021 8,139 1 View

Open Source IoT Simulators supported by Machine Learning?

Dear Research Gaters, Let me first add context to the question. I am looking to simulate the waste management system and resources of a city. The hardware devices I need to simulate include,...

21 February 2021 2,333 4 View

What type of pressure sensor are usually used in microfluidics?

My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...

18 February 2021 9,928 2 View

How to realize refractive index values of 1 to 1.1?

Hello researchers! While studying the literature on refractive index sensors, most of the articles simulate their devices with a refractive index ranging from 1 to 1.1, with small steps in...

17 February 2021 1,578 4 View

What should a smart water system look like?

Our team is designing a smart water C&C dashboard for a smart city initiative. As we look into the current smart water system landscape, we couldn't reconcile to a definitive solution that...

16 February 2021 1,094 3 View

Receiving very less number of hits and events in acoustic emission tests?

I am doing a three point bend test with concrete specimen of dimension 280mm*90mm*90mm. I am putting 2 sensors near the notch with 3cms away from both the sides. the experiment ran for 20 mins but...

13 February 2021 2,990 1 View

What are the effects of temperature and Relative Humidity in the dropwise condensation?

Hello Everyone! I was looking for the effects of the temperature and the relative humidity on the dropwise condensation. I was looking for the papers related to it explaining it in deep. I looked...

12 February 2021 4,196 2 View

How to increase coupling range (distance between reader and sensor coils) in LC resonance circuit?

Hello great researchers, I am working on a wireless pressure monitoring project where sensing part is actually an LC resonance sensor and I am using a planar coil as a reader to get wireless...

11 February 2021 4,148 5 View

I am looking for a microbend optical sensor design...can anyone please provide me some idea about it??

I am working on a landslide model...i need an optical sensor to determine the amount of pore pressure and other values..i am thinking of using a microbend sensor. Can anyone please provide me with...

11 February 2021 5,911 2 View

M.C. Manoj

Hello Ivan,

Thanks for the manuscripts.. and the message.

Normally we are constructing temperature records from most of the proxies and giving a small hint for the humidity. I am looking for a reliable humidity proxy. Because, what we have in Indian context is monsoon precipitation and humidity must have also play a major role and cyclic pattern..