which devices we need for establish a laboratory for characterization of carbon nanotubes?
FESEM, Raman, TGA, HR-Tem
for basis studies: Raman, AFM & UV-Vis
for Structural analysis: SEM, FE-SEM & TEM
You should have access to many different laser lines for Raman! One doesn't make much sense. For SWCNT PL is good but it also depends on the dispersing agent you're using.
Why does martensite transformation in ordered structure (Super lattice) occur easier than disordered structure, for example in ordered Fe-Pt structure (ΔH austenite to martensite = 340 and ΔG=17...
31 December 2015 2,415 3 View
1- Diffusion 2- Corrosion 3- decrease of dislocation 4- increase of vacancy 5-Phase Transformation 6- precipitation or resolved precipitation 7- Oxidation
02 March 2014 6,729 3 View
Show that the body-centered-cubic crystal have three families of slip systems, i.e. twelve slip systems of (110)[111]-type, twelve slip systems of (112)[111]-type and twenty four slip systems of...
31 December 2013 4,490 1 View
How can I calculate the surface of nanoparticles? For example: how much is surface of 100 grams gold nano-particle with size of 20 nm? Or how much is surface of 100 grams gold micro-particle with...
11 December 2013 3,866 20 View
What is the number of carbon atoms in the (0, 3) unit cell of carbon nano tubes?
11 December 2013 1,984 0 View
Seeking to find out the reasons behind this observation.
11 December 2013 782 3 View
Seeking to understand this relationship.
11 December 2013 3,121 18 View
How is XRD diffraction pattern of graphene, single-walled carbon nanotubes, and multi-walled carbon nanotube?
11 December 2013 5,046 2 View
What is the natural color of objects related? All materials with change in dimensions (nano size) have changed color?
11 December 2013 5,695 1 View
Each atom, for it to be stable, needs to more atomic bonding and coordination number illustrate the number of atomic bonding. Maximum coordination number is owned Fcc and hcp lattice. According to...
10 November 2013 268 60 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 942 3 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,291 2 View
I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...
09 August 2024 5,048 2 View
I need to do some experiment with it in liquid form.
07 August 2024 613 3 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,716 0 View
Hi! So i attempted to understand a novel protein behavior towards heat application by analyzing its secondary structure change. I subjected the protein to a thermal denaturation analysis using...
06 August 2024 1,989 3 View
I am working on Abaqus/Explicit(Quasistatic ) for the deformation of the auxetic structure model. Please explain how the plastic input value should be considered from the true stress-strain curve...
05 August 2024 454 3 View
The starting material is a finely ground powder. Some particles contain more graphene than others.
30 July 2024 3,978 2 View
I am currently working on modeling FCC catalyst regeneration and have come across a point of uncertainty that I hope you can assist me with. In my previous models, I have utilized lumped kinetics...
30 July 2024 6,137 0 View