For example I want to print a nanocomposite using a polymer with nano ceramic and a nano metal.
According to literature it is possible.
It is possible... although there might be some problems with agglomeration/aggregation... clogging...
tweaking the software and other parameters might do the trick...
the printing process also matters (FDM, SLA, etc...)
It is possible if you wanna mix them together.
However, if you want to print them separately, for example, a ceramics ball inside a polymer shell, you may face huge challenges.
The polymer will pyrolysis when sintering the ceramics. Thermal deformations for different kinds of materials are not the same as well.
I want to use FEM in analyzing the hiearchical nanocomposite for biomedical applications. Please share me reference journals Analyses of hierarchical nanocomposite using FEM
31 December 2017 3,686 0 View
I need list of journals which I can publish 3D Printing, biomaterial, nanocomposites. Kindly share me if anyone know the journal names.
31 December 2017 2,855 1 View
I need to know what is matrix and what is filler in Polymer nanocomposite? Please could anyone explain me with a detailed answer?
07 August 2017 9,480 3 View
I would like to know which software you have used in this work to model
01 January 1970 4,688 2 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,176 3 View
Dear fellow researchers, I am currently working on a paper where I need to provide a reliable reference that defines and distinguishes between 3D mesh models and 3D city models. Although I am...
06 August 2024 9,986 2 View
Is anyone here using the Thermo Fisher Nano Orange kit for protein quantification, and detecting the fluorescent signal on the Promega Quantus? We are struggling to make sense of the standard...
05 August 2024 8,946 3 View
I am seeking experimental or applicable data for the liner (LLDPE) interface in FLAC3D numerical modeling of a large stockpile. Could you please recommend suitable references? The preferred data...
05 August 2024 3,665 0 View
My screen printed electrode CV is given here. For Nerstean one electron reaction the delta E value should be close to 57 mV and ration of Ic/Ia should be close to 1. I did CV of my screen printed...
30 July 2024 4,671 3 View
Dear all, I am working on particle deposition in human's & rat's respiratory airways using CFD and I am looking for the 3D CAD file for my simulations (STEP or IGES format). If somone has such...
29 July 2024 1,092 2 View
Please introduce me the latest published articles on the structure and properties of metal nanocomposites?
26 July 2024 2,199 3 View
Does it exist some special technique for cutting ceramic membranes for Cross-sectional FESEM or SEM images?
25 July 2024 5,482 2 View
Hello, I am experiencing an issue with mixing micro powder with resin in a 3D printer. The problem is that sedimentation occurs after a short period (about half an hour to an hour). Could you...
23 July 2024 1,672 0 View
Dear All, I use Quantum Espresso. I want to optimize the structure of the carbon nanotube using the vc-relax. I got confused about how to fix cell_dofree here. For 3D, cell_dofree = 'all' or...
22 July 2024 5,708 0 View