Steel fibers can be introduced into the concrete at the batch plant or jobsite. Consult Fibercon Fact – Mixing, Placing and Finishing for more details on the proper methods of adding fibers to concrete.
steel fibers be added to the concrete: Mixing, Placing and Finishing for more details on the proper methods of adding fibers to concrete.
Currently I'm working on various cementitious materials and its structural applications. In this regard, can i know the beam dimensions suitable for experimental work. Also provide standards and...
06 July 2019 9,552 3 View
SCOPUS/SCI
05 June 2018 9,948 0 View
Scopus journals required.
03 April 2018 4,371 44 View
Is there any fast publication journals that are indexed by SCOPUS in Civil Engineering?
03 April 2018 726 0 View
concrete mix are of many types ,generally for domestic construction we use M20 grade of concrete where 'M' is the mix of ingredients such as cement, agrregates(fine and coarse) and water and...
01 February 2017 8,642 15 View
Pumping has been used to transport SFRC on many projects. In general a mixture that will pump satisfactorily without fibers will pump with fibers. In pumping SFRC, the chute from the readymix...
01 February 2017 9,916 0 View
This research describes experimental studies on the use of natural fibre (tap roots) as enhancement of concrete.The addition of tap root-fibres significantly improved many of the engineering...
01 February 2017 4,702 3 View
WRI states in Tech Facts 705 that two of the primary purposes for reinforcing slabs-on-ground are for shrinkage and temperature control. SFRC is an economical way of controlling cracks due to...
01 February 2017 1,324 1 View
When fibers were first introduced balling was an issue due to the high aspect ratio and long length. Our standard fibers have aspect ratios of less than 50 and are 1” in length. As the aspect...
01 February 2017 3,943 0 View
As binder material.
31 December 2016 9,271 6 View
I am trying to simulate vehicular loading on an orthotopic steel deck bridge section in ABAQUS software. The red arrow mark in the attached figure indicates the direction in which the vehicle will...
08 August 2024 719 0 View
I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...
07 August 2024 1,028 0 View
Machine learning (ML) has shown great potential in predicting the compressive strength of concrete, an important property for structural engineering. However, its practical application comes with...
03 August 2024 2,546 2 View
Suggest one of them 1. Teflon-lined stainless steel autoclave: 2. Alumina (Al2O3) ceramic container
30 July 2024 7,326 1 View
The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...
27 July 2024 8,508 0 View
Please investigate the effect of temperature and strain rate of hot deformation and the formation of delta ferrite in martensitic stainless steel 410?
25 July 2024 9,408 0 View
I have tried to saturate ferritic steel with hydrogen using the electrolytic method and H2SO4. However, the effect was very poor even after 3 days of "saturation". Can anybody help in choosing a...
24 July 2024 4,393 2 View
I am working on scale development in behavioral finance by undertaking a mixed-method approach using the exploratory sequential design. The phenomenon has diverse meanings in existing literature...
20 July 2024 9,153 11 View
I am simulating interlocking / dry stacked masonry in Abaqus. I am using a friction coefficient of 0.6 for my model as it is stated in the previous research as well as in the base paper. The...
16 July 2024 5,047 0 View
In the expression for solid solution strengthening model that has been widely used in the literature use a linear form consisting of strength coefficient, and concentration of elements in wt.%....
11 July 2024 4,476 3 View