02 June 2023 1 5K Report

I tried TUNEL assay to know the apoptosis rate in cryopreserved bovine embryos using APO-BrdU™ TUNEL Assay Kit (Catalog Number   A23210)but not getting expected result so what would be the probable reason for these ????

More Jainik Prajapati's questions See All
In Abaqus, How to determine cracks in the macro model 3D structure having element type C3D8 as wall brick mud masonry element?

A masonry structure modelled all the wall using macro element and performing non linear time history analysis in dynamic explicit . I need to determine the random cracks where a give stress...

01 June 2024 1,349 1 View

For how much time single cell of Xanthomonas oryzae can be alive at room temperature in nutrient deficient condition?

--

20 May 2024 3,673 1 View

What is the basic python code for reading the .grd file of quad-pol UAVSAR data?

I have processed the quad-pol SAR data using POLSARPRO tool, followed by matlab. Now to cross verify my results, I am looking for code in Python or Matlab to read the vv polarized file in .grd or...

01 May 2024 8,734 4 View

What is the upper limit for the Prandtl number in Gunn correlation of fluidized bed?

Dear Expert, what is the upper limit for the Prandtl number in Gunn correlation which is used to calculate heat transfer between gas-solid fluidized beds?

29 March 2024 1,474 1 View

Unable to search ?

Why I'm unable to search for anything on the research gate? As soon as I enter the query for research it asks for verification of my network and it's frustrating. Please provide a solution.

22 March 2024 1,788 0 View

How many paper or article published in a year ?

i am student in THI, Ingolstadt. you please tell me till 2023 research gate how many paper or article published in the year?

20 December 2023 6,887 1 View

Why we get two energy band gap in Ultra high molecular weight polyethylene? and which energy band should be considered as an fundamental band gap ?

"I have generated a Tauc plot for UHMWPE to determine its direct energy band gap. The resulting graph exhibits two distinct linear portions, leaving me uncertain about which segment should be...

14 December 2023 6,666 2 View

Suggestions for Three years work Design ?

I plan to design work on Cancer for three years of work in the Microbiology and Bio-Informatics discipline in a broad way and the work will be 90% in Bio Informatics and 10% in Microbiology. so I...

05 December 2023 5,187 3 View

How can I add or couple ML models in fluent?

Dear Expert, My question is, is there any way to call or couple the code file (Matlab or Python) in the fluent simulation? if yes please let me know the what is procedure and steps. I created an...

02 November 2023 9,869 3 View

How to create an final equation (predicted value) based on ANN?

Dear Expert, I used the Neural Network in MATLAB using inputs [10*3] target data [10*1] and one Hidden layer [25 neurons]. then How can I create an equation that correctly estimates the predicted...

31 October 2023 612 6 View

Similar questions and discussions
What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

Does Anyone have expertise in in vitro transcription and RNA pull down assay?

I am currently working on LncRNA; to know the lncRNA-protein interactions I want to do RNA pull down assay, so I need to design primers with T7 promoter. I need assistance in this regard.

07 August 2024 6,622 1 View

How to fix errors in my heat transfer steel structure with reinforced concrete slab model Abaqus?

I have modelled a steel structure using beam elements in Abaqus and attached to this structure reinforced concrete slab. The analysis that I am making is heat transfer of the structure. The...

07 August 2024 1,028 0 View

How to improve plaques in Double Layer Agar Assay?

Hi all! My thesis groupmates and I are working on purifying an E. coli bacteriophage. The phage was handed down to us by the previous thesis group, but they only managed to purify it to about...

06 August 2024 5,801 4 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

How Can I Apply Hashin Damage Properties to Solid Elements in Abaqus Without Using VUMAT?

Sure, here is the translation: I have a 3D orthogonal woven composite structure where warp, weft, and binder yarns are oriented in three directions. After modeling these yarns and the matrix in...

28 July 2024 8,169 0 View

Will the catalytic effect of retained austenite happens in steels including RA?

The catalytic effect of retained austenite refers to the phenomenon wherein quenching steels with a small amount of retained austenite, when subjected to tempering at a specific temperature...

27 July 2024 8,508 0 View

Reason for discontinuities in my Band structure?

Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...

25 July 2024 2,920 11 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close