What type of contact in LS-DYNA considers only compression while has no shear and tensile resistance in IMPLICIT analysis??

13 February 2025 0 5K Report

Hello, I need a contact in LS-DYNA that behaves like a TIE contact but only works in compression, without any shear or tensile resistance. Is there a suitable contact type for this?

Badges
Science topic

More Morteza Mohemmi's questions See All

How to model compressive behavior in TieBreak contact in LS DYNA?

I am modeling a masonry wall in LS DYNA, which has multiple interfaces in between. To simulate the interface between blocks I use the TieBreak contact, which requires normal and tangential...

27 December 2023 4,822 1 View

Why is cohesive interaction behavior different in Dynamic Explicit and General Static analysis under compressive force in Abaqus?

I modeled two elastic steel plates with cohesive interaction between them and applied a compressive force on the upper plate. I tried to get compressive load-displacement curve but the result is...

05 June 2023 6,024 2 View

Can anyone explain why there is not any color bands in the middle portion of the tensile coupon?

Details of the Analysis. Static Analysis Composite Layup Continuum Shell Elements FRP Material (Elastic and Hashin Damage)

03 August 2024 8,538 4 View

What is the best way to drop a plasmid?

Please address the best way to drop a plasmid. Background: I have a "bait" plasmid resistant to kanamycin and a "prey" plasmid resistant to carbenicillin. After many rounds of streaking on...

25 July 2024 2,532 3 View

How to add viscosity into a hyperelastic material such as Mooney-Rivlin rubber in LS-DYNA?

Hi, I am working on a head FE model and want to try different material types on brain. I read some papers that use Mooney-Rivlin rubber model and wondering if i can add viscosity into it. Is it...

24 July 2024 5,908 0 View

Why my simulation results are showing too much deformation compared to experimental result?

I performed fea on tensile dog bone specimen using ANSYS static structural and also tried using ANSYS explicit dynamics. In experimental result the load is 500 N and deformation is 0.6 mm...

13 July 2024 3,631 4 View

My rosetta strain has chloramp resistance and i am transforming my plasmid with amp resistance but not getting colonies on chloramp/amp LB plates?

I have done the same procedure with BL21 and pLysE but i got colonies but multiple times on rosetta i did but not getting. can anyone explain what would have gone wrong?

12 July 2024 9,904 1 View

Quelles applications innovantes peuvent bénéficier des propriétés des géopolymère?

Les géopolymères offrent plusieurs propriétés intéressantes qui peuvent être exploitées dans diverses applications innovantes : 1. Construction durable : - Bétons à faible empreinte carbone -...

10 July 2024 7,457 1 View

What is alternative for PMMA?

If we want to introduce a material similar to polymethyl methacrylate "with the characteristics mentioned in the next paragraph" that can be added to a precursor and create a composite, which...

03 July 2024 2,371 1 View

How can we reduce the porosity of tungsten oxide (WO3) thin films during DC sputtering deposition (target: W, power: 100 W, 75 W, and 50 W)?

We are fabricating a tandem structure where a ~50 nm thick WO3 film is deposited between two metal films using DC sputtering. We use a mixture of Ar and O2 gases at different flow rates while...

01 July 2024 2,686 2 View

Hi i m workiking with hct116 resistant and naïve cells after passage half of my cells die can anybody help?

thanks

25 June 2024 4,667 0 View

An issue from another discipline：During the battery impact simulation, some units failed and penetrated. How can this be resolved?

LS-DYNA finite element simulation：During the battery impact simulation, some units experienced failure and subsequently underwent penetration. How can this issue be resolved?

24 June 2024 3,917 0 View