for organic/inorganic schottky diode structure
MSM Photodetectors and pn diode
Dear Sha Anwer Kakil
Thank you for all your assistance
Very basic description can be found in my recently published book "Basic Properties of III-V Devices - Understanding Trapping Phenomena" (Kassel University Press GmbH, 2014).
Dear Günter Kompa
Thank you for providing the requested information.
Organic/Inorganic Schottky diode structure.
02 March 2015 5,921 6 View
Organic/inorganic schottky diode structure.
31 December 2014 5,240 4 View
organic/ inorganic schottky diode structure
31 December 2014 3,477 2 View
My problem is that I can't draw a curve that I want to extract the series resistance (and I've put the current and voltage as variables).
10 November 2014 5,135 5 View
For the calculation of barrier height ......etc
07 August 2014 3,203 2 View
Characterization by XRD
06 July 2014 583 2 View
Approximate concentrations are require in compared with the WHO permissible limts
11 August 2024 2,723 1 View
Hey there, As a synthetic chemist delving into theoretical calculations for my imidazolium-based organic molecules, I would greatly appreciate any guidance on the appropriate input instructions...
09 August 2024 5,444 7 View
If we map as a continuous motion an ionising electron (beginning its journey at n=1) in an H atom, a specific hyperbolic spiral appears (see animation). When we solve this spiral formula, we find...
07 August 2024 5,343 2 View
Let's say we have a standard, regular hexagonal honeycomb with a 3-arm primitive unit cell (something like the figure attached; the figure is only representative and not drawn to scale). The...
07 August 2024 1,937 1 View
Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.
07 August 2024 8,782 3 View
Air moisture harvesting Air water collection devices
06 August 2024 5,473 2 View
I used humic acid at 0.044 g/kg soil in my pot experiment. But finally, I have to recommend kg/ha. Each pot's soil weight was 11 kg. What is the solution?
02 August 2024 7,186 6 View
What types of mask designs for metal deposition, to be used in a PVD system, are best suited for perovskite-based solar cells?
31 July 2024 4,835 3 View
Dear all! Oxygen vacancies do raise negatively the Fermi level by increasing the negative charge in the semiconductor crystal structure. In the case of n-type semiconductors, I wonder if this...
30 July 2024 8,339 2 View
Hi everyone, I'd like to better separate two close peaks coming from a bioconversion sample, I'm currently using a C18 KromaPhase 4,6mm Ø.I. SCHARLAU, particle size (µm): 10, pore size (Å): 100,...
30 July 2024 435 3 View