tell me that reason
can you give me die designs
Please give answer to my question.
06 July 2019 1,616 3 View
how is the cell construction in center hole thermal battery.means what is the diameters of anode,cathode and heat pellets and separator.
31 December 2018 9,739 0 View
we can't use any lubricant because here we can't use any liquid.
10 November 2018 948 4 View
we need binding material to produce uniform compaction and that binding materials will not produce gas.
08 September 2018 1,486 3 View
we are working on thermal batteries in that we use different powders to make pellets.But the pellet is in not uniform and not green strength.what is the suitable binder can be added to the iron...
08 September 2018 929 0 View
after fusion the powder is in fine and it is produce uniform in size after compress the pellet.
08 September 2018 2,197 2 View
i need this information to get uniform pellets
08 September 2018 889 3 View
Our thickness range up to 1.5mm.is there machine or die problem to not get the uniform thickness or powder problem we are pressing manual and filling powder is also manual in die.tell me the...
08 September 2018 2,383 1 View
we use weight 0.5 to 3 gr.In this range we have to get green strength and our thickness range is 0.1 to 1mm .in this range how much pressure is required to make the pellet is uniform
07 August 2018 5,205 1 View
How to calculate pressure in powder compaction pressing by knowing of weight of material and thickness and diameter in theoritical.
07 August 2018 9,779 6 View
Hello, I am currently having problems with RNA extraction. I am using mouse liver (C57BL6J), and I have extracted RNA from mouse liver before. Before this experiment, my final RNA pellets were...
11 August 2024 7,082 3 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,629 1 View
We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.
08 August 2024 3,161 0 View
I am not able to get good literature and the physics behind how first these grains and grain boundaries arises out of no where when we make a pellet to study its dielectric properties and then how...
07 August 2024 5,177 3 View
All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.
01 August 2024 589 4 View
I am trying to prepare samples for IP. The pellet size is good and I am using 1% Tx-100 and using a syringe to further lyse the cells and maintain protein-protein interactions. I keep having a...
01 August 2024 7,199 1 View
I'm fairly new to making homemade comp cells and have done so with some mild success. What is generally an acceptable way of resuspending comp cells during wash steps? I've been told to swirl the...
31 July 2024 8,309 0 View
List down the various factors responsible and how does this effect the overall biogas production when it is related to Hydraulic retention time of the digester based on the feedstock?
27 July 2024 4,800 4 View
Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...
25 July 2024 2,920 11 View
It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...
24 July 2024 8,596 2 View
