When we use aeration?

What are targets of water aeration

31 December 2016 1,435 0 View

What is the cheapest method of aeration?

Think about aspiration

31 December 2016 3,806 0 View

What is the role of capillary-conducted phase in liquid-liquid separation?

In connection with drop coalescence.

10 November 2016 8,589 0 View

What is the influence of inlet oil concentration on separation efficiency of oily waste water using fiber bed coalescer?

In range from 500 mg/l to 2%

10 November 2016 4,166 0 View

What is capillary-conducted phase in porous matrix?

Spielman was used this term

10 November 2016 9,830 0 View

What is the best solution for bed in coalescer to use fibers of polymers or stainless steel?

Explain the reason.

10 November 2016 525 0 View

Are there any differences in design for coalescer for liquid/liquid separation and gas/liquid separation?

Talking only about fiber bed coalescer?

10 November 2016 5,902 0 View

There are limit in capacity of bed coalescer for liquid/liquid separation?

For oil field for example.

09 October 2016 2,898 5 View

What is the main diferencies between polymer fibers and fibers of stainless steel?

Do not thing about surface energy?

09 October 2016 6,542 0 View

What is the proper method for determining the wettability of polymeric fibers?

10 November 2014 8,430 14 View

Glass fiber content in a gypsum board ?

Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !

01 March 2021 2,501 3 View

How to model the battery pack in PSIM or PSCAD?

Hello, I have simulated a single battery cell using Thevenin equivalent circuit. For a battery pack, I have a large number of cells connected in series and parallel connections. Is there any way...

28 February 2021 2,116 1 View

How to find the right number of integration points in second order 3d finite elements?

I am familiar with finite element simulations and numerical schemes like the Gauss Legendre quadrature. I also know that the Gauss integration yields exact values for polynomials up to degree 2n-1...

27 February 2021 6,818 3 View

High aspect ratio hexahedral mesh optimization solver?

I am interested in evaluating mesh optimization solvers that converge to high aspect ratio unstructured hexahedral grids. In other words, I am interested in a solver that optimizes warpage,...

26 February 2021 7,279 2 View

Your thoughts on the spherical densiometer to estimate relative species canopy cover?

Hi biologists and biogeomorphologists, I want to characterize vegetation plots on a transect that follows a successionnal gradient from a river bed to a mature forest. Ecologically, I am...

26 February 2021 5,720 2 View

How can we limit artifacts caused by rotation in fiber photometry?

We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...

25 February 2021 568 1 View

Anyone with some Transgenomic Wavemaker software? Seeking help from the chromatography community?

I am trying to seek out some Transgenomic Wavemaker software (happy to purchase a computer too) to operate a fraction collector. The only way to connect to the fraction collector so far is to...

23 February 2021 9,181 1 View

How to properly calculate Interfacial area density in a porous domain?which are possible value for glass fiber?

I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...

23 February 2021 6,043 1 View

How to validate regridding results of environemental data to higher spatial resolution in R?

I am working with several continous, environmental marine datasets at varying original spatial resolutions. My aim is to regrid each dataset to one common, high resolution grid. I am currently...

22 February 2021 2,290 2 View

How can we add reinforced thermoplastics with granules in injection molding machine?

I need to make an injection molding machine in which short fibers are to be introduced. Short fiber length and material properties are to be determined and also the material strength are to be...

22 February 2021 4,290 1 View