Talking only about fiber bed coalescer?
What are targets of water aeration
31 December 2016 1,435 0 View
Think about aspiration
31 December 2016 3,806 0 View
In connection with drop coalescence.
10 November 2016 8,589 0 View
In range from 500 mg/l to 2%
10 November 2016 4,166 0 View
Spielman was used this term
10 November 2016 9,830 0 View
Explain the reason.
10 November 2016 525 0 View
For oil field for example.
09 October 2016 2,898 5 View
Do not thing about surface energy?
09 October 2016 6,542 0 View
09 October 2016 926 0 View
10 November 2014 8,430 14 View
Any idea on how to get the volumic ratio of glass fiber in a gypsum board ? Thank you for your help !
01 March 2021 2,501 3 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...
28 February 2021 6,477 1 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...
26 February 2021 1,511 3 View
Hi all The question is related to TGA(Thermogravimetric analysis). Thermal degradation easily understood but why do samples weight decrease? altough just binding is broked, the weight of...
26 February 2021 1,100 5 View
Hi biologists and biogeomorphologists, I want to characterize vegetation plots on a transect that follows a successionnal gradient from a river bed to a mature forest. Ecologically, I am...
26 February 2021 5,720 2 View
Dear All, We are using Autodesk cfd to calculate the air flow in a single sided naturally ventilated room, where air flow depends only on buoyancy due to temperature difference between inside and...
25 February 2021 9,602 4 View
We are trying to run fiber photometry experiments for long time scales, but we get these sinusoidal artifacts that come up. We think they may be caused by twisting of the fiber optic subject...
25 February 2021 568 1 View