Why calcium oxide nanoparticles becomes black at 650 degree temp?

Please tell me, which temp can I select for neglect black color of the Calcium oxide nanoparticles ..

14 January 2021 5,341 5 View

Abaqus static analysis - Applied tensile axial force on B21 cantiliver beam does not balance reaction. Can you please advise on resolving this?

I have modeled a cantilever beam in Abaqus to test metal plasticity option. The beam is cantilever, 10 m long, and discretized into 10 B21 elements with 1m x 1m cross section. The beam material is...

01 January 2021 696 0 View

Advice on choosing FISH probes with good sensitivity for lncRNA?

Hi, I am doing localization and abundance studies on a novel lncRNA. I would appreciate some advice on the kind of FISH or LNA tech. kit/fluorophore to use and the products which have high...

18 October 2020 7,701 2 View

Does anyone have digitized Soil and LULC map of Bihar - India?

Dear All I am working on the Government-funded project to understand the hydrological and soil behavior of the Gaya district and Bihar state in order to understand the slope stabilities and soil...

22 September 2020 3,633 7 View

Can any one help in finding exact focus area for conducting research on data analysis for smart grid applications?

What can be the area of focus? I request eminent researchers in the field to recommend the algorithms on data analysis for Smart Grid for better understanding. I request to consider open source...

02 September 2020 7,625 8 View

Limit of sample loading in Biotage flash purification system cartridges?

I am using Biotage Isolera one. There are different columns available based on amount of stationary phase. Does anyone know/have a chart on maximum limit of crude sample that can be loaded into...

05 February 2020 9,159 6 View

Can you please suggest some good journal for publishing a review article on WSN quality of service issues ?

I request to add some journal titles that are giving first decision in 1-2 months positively. Thanks in advance.

28 February 2018 7,920 9 View

Does anyone please let me know the standards to perform the mechanical tests (compression behavior) on polymeric scaffolds.??

Please shower your insights on testing parameters of polymeric scaffolds.

29 January 2018 8,834 3 View

No title

27 July 2017 1,748 3 View

No title

22 May 2017 7,483 8 View

What are the saturated salt solutions that can give specific relative humidity of 35%, 65% and 95% for conditioning wood specimens?

Due to the unavailability of climate rooms, I want to carry out an experiment that require the use of certain saturated salt solutions especially those that can condition the wood specimen to 35%,...

25 February 2021 8,139 1 View

What kind of steel moulds are used for hot pressing metal powders?

My main concern is that the metal powders should not weld to the mold surface and I should easily be able to eject out the pressed samples. I am looking for alternative for graphite moulds. The...

22 February 2021 2,965 4 View

Why high voltage and current (and some gases) Cause Spray-mode metal transfer in Gas-Metal Arc Welding (GMAW)?

This transition phenomena of Globular to spray mode as voltage , and especially current is raised, is very commonly known to Manual Metal Arc Welding (MMAW) and Gas-Metal Arc Welding (GMAW)...

20 January 2021 7,984 2 View

Why does Reaction Wood acts opposite in gymnosperm and angiosperms?

I am wondering why the Gymnosperms have an opposite behaviour that Angiosperms in the Reaction Wood (RW). Are there some new findings regarding that? Studies say that causal agents can be the...

10 January 2021 8,744 4 View

What are the primary defects associated with welding druring construction-stages which might influence the capacity of the gusset-plate connections??

Dear researchers What are the primary defects associated with welding druring construction-stages which might influence the capacity of the gusset-plate connections in concentrated braced frames?...

06 January 2021 797 3 View

What are some of the applications of transparent wood?

Are there any particular uses for transparent wood other than visual appeal? The transparent wood is really cool to see, but what are the practical uses? Please provide examples. Happy New Year!

31 December 2020 2,479 4 View

How do wood moisture meters function when applying on live trees?

Eleven months ago I girdled 17 trees and measured the moisture content, at the place where they had been girdled, with a wood moisture meter. Typically, the moisture meter showed a reading of...

26 December 2020 7,761 2 View

Why the taste of foods(item) changes with the sources of fuel we used(bio fuel,wood,dried dung) reality or meth ?

As my experience and many consumer experience they feel the different taste of the same item served cooked in a different source, is it real or not, what is the reason behind this.

24 December 2020 6,476 3 View

Anyone has some paper on welding of boron steel with stainless steel ?

A colleague of mine is researching conditions for arc welding of boron steel with stainless steel through GTAW. I haven't seen much literature on this topic. Can someone provide me with papers or...

22 December 2020 5,756 3 View

How to model the vapor plume during laser welding process using Fluent?

Problem description: I am using ANSYS Fluent (multiphase VOF & solidification and melting model) to simulate laser welding process. Is there any possibility of establishing a fully coupled...

05 November 2020 893 1 View