My sample is powder of hydrochar which is prepared from activated sludge and I want to activate with KOH. So, can you recommend me at what temperature and nitrogen gas flow rate is good for activation?
its very important in steel process the nitrogen help to remove the nonmetalic inclusions,
The nitrogen removes the oxygen from your sample. The temperatures and flowsdepend on the pypyrolysiscompound you want to detect.
Some exsamples are here:
http.//www.sciencedirect.com/science/article/pii/S136403211500060X
Is that starting from proposal development to result writeup or just from data collection to result writeup and reporting (publishing)?
28 February 2021 910 2 View
As recent studies show, the high % global warming causes by gas emissions (CO2), mostly from industries. Can the CO2 turn into a valuable product/to reuse? How? for what can use? Any suggestion.
20 January 2021 5,283 2 View
Any references Previous works
14 December 2020 9,721 3 View
I have know sequence of mRNA. but i need to amplify the unknown region of 5'end ? to do this that needs GSP1(reverse) and GSP2 primer(forward). my kit protocol states your GSP2 primer is anneals...
21 October 2020 7,056 2 View
when two different plant species are examined separately for the same pharmacologic effect in preclinical screening studies, they do produce significant effect for a certain pharmacological...
22 May 2019 9,760 3 View
I want to calculate the fracture toughness for my composite sample and i want to prepare in Double cantilever beam (DCB) configuration on ansys for the Mode I fracture tests. i will be happy if...
10 October 2018 4,269 4 View
Can you help me to elaborate some mechanisms to control the gas emissions from factories, and is that possible to liquefy the gas and use as valuable products ( such as fuel sources, oil,........)?
27 June 2018 3,819 6 View
Insects have been consumed by human diet since prehistoric times. At present, the idea of looking at insects as food has been getting traction worldwide, also in response to increasing food...
03 March 2021 6,223 5 View
Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...
02 March 2021 1,999 5 View
Hello, I would like to ask how to grow E.coli which resists 50 or 100ug/ml of Blasticidin. I have tried many methods by using low salt Luria-Bertain(LB) agar plate. However, no colonies grow. Let...
01 March 2021 2,027 2 View
Hi all, I need to cleave the ester in Ethyl 2-amino-1H-imidazole-5-carboxylate to make the carboxylic acid and retrieve the product from solution to use in downstream applications of linking to...
01 March 2021 8,766 3 View
Hello Everyone. Currently I am working to characterize macrophages in the myocardium after ischemia-reperfusion injury in rats. Due to the low total cell number isolated from rat hearts I can...
01 March 2021 3,867 3 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
I am doing my thesis on the nutrient deprivation on the macroalgae Rhizoclonium sp. I will be analysing the levels over a period of roughly 5 days by HPLC-UV and GC/MS. I will be using seawater as...
28 February 2021 6,477 1 View
I have a tank which contains natural gas at 250 Bar and 293 Kelvin. I want to cool the gas in a dry-ice cooling bath to about 195 Kelvin. The gas will flow in a copper-tube through the bath with a...
27 February 2021 8,128 1 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...
26 February 2021 1,511 3 View