I am working with screen printed carbon electrode and FTO coated glass electrodes for sensor studies. My electrolyte is PBS solution (pH=7). Please discuss what are the initial and final frequency that are commonly used for recording EIS spectra of these electrodes (bare electrodes).
Vishnu Sankar
it's prefered that frequency should be ranged from 10 mHz too 1 MHz
Thank you.. but I don't think my instrument can go as low as 10mHz.. could you please give any reference for the same
Vishnu Sankar
You can work at at 100 mHz , and here's a reference for it
Article Carbon nanoparticle modified screen printed carbon electrode...
There is a very simple way to determine the frequency range in which to perform research - this is the frequency range of the measuring setup.
- Badges
- Science topic
- Similar topics
- Engineering
- Electrical Engineering
- Electrodes