e.g. width of channel increase from 50 micron to 100 micron.
Is surface roughness affects due to increase in width?
Mainly surface roughness is dependence upon the size grain and grain boundaries. If you have to study the effect of surface area you have to take the microstructure of channel before machining.
How to calculate lattice diffusion coefficient and grain boundary diffusion coefficient for Monel 400?
09 October 2016 7,711 0 View
I do not know much about FTIR! The material Benzethonium Chloride USP was compared to a reference standard in regards to FTIR, as per the USP testing: Identification B. Infrared absorption (FTIR),...
16 July 2024 6,918 7 View
I have made an unpleasant discovery that I seemed to use these terms incorrectly. 'Alluvial' seems to mean "out of the river channel", flood-plain' etc. While all these cross-bedded...
15 July 2024 2,073 3 View
I am getting trouble in studying the effect of channel doping variation in forksheet structure for p and nmos.
08 July 2024 2,074 0 View
Sir, I want to work on the laser assisted machining (turning) of Nickel Based Super alloy. Please help in finding the laser assisted machining facility in India. Thanks and regards
02 July 2024 2,086 2 View
Effective public communication of research findings requires a combination of skills, including translating technical information, crafting engaging narratives, leveraging multimedia, and actively...
01 July 2024 1,330 2 View
I am simulating 1 cell of PEM with an area of 50 cm². The mesh has an orthogonality of 0.2 for the channels and bipoar plates (polyhedra) and a quality of 1 for the active zones (hexagonal). The...
26 June 2024 2,358 0 View
Sample type: Corn leaves and stem Bean leaves and stem
22 June 2024 2,082 3 View
In quantum cryptographic protocols, participants typically share both a quantum channel and a classical authenticated channel. Authenticated channels ensure that messages come from legitimate...
22 June 2024 7,074 3 View
How does power allocation strategy in NOMA for 5G networks impact the trade-off between system capacity and user fairness, particularly for users with varying channel conditions?
18 June 2024 4,592 2 View
I want to trap fluid (water..) in the PDMS channel for a long time. After a short period, the channels become empty of fluid. Is there a way to reduce the permeability of PDMS?
17 June 2024 2,703 4 View