28 July 2019 1 6K Report

I want to calculate cloud point temperature and pour point temperature for crude oil samples based on black oil properties of crude oil like density, viscosity, bubble point pressure etc. and system pressure. Is there a correlation to calculate these available in the literature?

More Amit Katyal's questions See All
How to show a protein is being dimerized in SDS-PAGE gel?

A protein dimerizes through CTD. I have expressed CTD of protein with two different tags. Now, I want to show that these CTD of protein dimerize in a pull-down assay. But my doubt is that if the...

29 January 2021 7,529 4 View

What are the impacts of pKa1and pKa2 in drug absorption ?

Pregabalin is a crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. what insight can i get from this aforementioned information during drug design. What is the difference between pKa1and pKa2.

28 December 2020 7,237 3 View

How to deal with negative factor loadings while performing PCA-MLR to calculate quantitative source contribution in air pollution studies ?

If I am getting some negative values in factor loadings while performing principal component analysis (PCA), then I should use that negative values to calculate daily source contribution using...

22 December 2020 5,248 1 View

What are the source markers of Naphthalene, Acenaphthylene and Acenaphthene in ambient atmosphere ?

Is any article available which reports the sources of these PAHs ?

22 December 2020 8,738 1 View

Why high infiltration in OM treated plot?

We are carrying out trial in the glasshouse where we are comparing the infiltration rate in sodic soil in two different treatments Polyacrylamide vs organic matter ( lucerne pellet). within 27...

25 November 2020 8,787 3 View

Where can one download data (csv, excel) for average daily values of AQI (air quality index) in popular cities, like, Delhi and Mumbai in India?

Air pollution has become a very big problem in Indian cities, especially Delhi. It requires immediate attention and we need to soon understand the trends, provide forecasts for future, issue...

19 November 2020 1,433 3 View

What is the best feasible method to plot DISTANCE vs LST graph?

The above question is intended to be answered in reference to the reduction of the urban heat island by the river.

22 October 2020 7,732 4 View

Which type of measuring instrument can be used to measure hot thermic fluid flow rate?

The flow rate of thermic fluid is less than 1 L/min and temperature ranges from 25 - 200 degree Celsius with a pressure limit of 5 bar.

06 October 2020 5,612 11 View

Can anyone endorse me for arXiv.org?

Hello, I need an endorsement to submit my preprints in arXiv.org. I am in the bioinformatics research field. The arXiv requires an endorsement for me because my institution doesn't provide any...

02 October 2020 1,041 4 View

How to calculate a flow rate over the broad-crest wear for this conditions?

How to find a relationship between velocity and weir landing length (X') as shown in figure?

28 September 2020 7,159 3 View

Similar questions and discussions
Why are the velocities so high in my Boussinesq approximation Fluent simulation?

Hello, I have a mechanism where air rises due to convective flows. In this simulation, nothing is driving the air except this. I understand that the Boussinesq approximation only works for small...

02 March 2021 4,910 3 View

How the wettability of rock sample can be changed by ageing in pure hydrocarbon oils only?

I want to do wettability analysis of hydrocarbon oil (octane)/rock/surfactant solution system. but to do the analysis first I have to make rock surface oil-wet. Since hydrocarbon oil does not have...

27 February 2021 5,383 3 View

Modeling viscosity using model of Chung?

Hello, As part of simulation of gases mixture and water, I need to calculate viscosity of the fluid components and I am using relationships proposed by Chung et al. (1988). The irony is while I...

25 February 2021 8,053 5 View

What is the suitable range of Sulfur content and Viscosity of Heavy fluid Oil that used in Kiln?

What is the disadvantages of high sulfur content to the ceramic burning process? and what is the effect of outranged viscosity?

24 February 2021 8,219 2 View

How can Gamma Ray API units be converted to CPS (counts per second)?

Oil and gas companies run gamma ray tool and take readings in API units while Gamma ray is also noted in cps, so how these units can be converted into each other?

24 February 2021 7,545 2 View

How to remove compound ( Europium complex ) from paraffin oil?

How can I remove my compound from paraffin oil? Mistakenly my compound fell in an oil. Compound = Europium complex

22 February 2021 5,667 2 View

When I mix oil and NaOH solution, Why solid layer in the surface is formed?

During my trial for lubricant oil re-refinery process, I use NaOH as coagulant agent. After overnight of gravity settling, a solid layer in the surface was form. what product is that? since the...

22 February 2021 2,116 4 View

The type of filter paper used to filter an epoxidized oil (the mixture is an epoxidized oil with magnesium sulfate) ?

I have a mixture of epoxidized oil and magnesium sulfate wich type of filtre paper should i use

21 February 2021 3,944 3 View

What reaction will occur when adding hexamine into ammonium nitrate in an acidic medium?

Hello, I am investigating properties of water in oil emulsion explosives. And adding hexamine (hexamethylenetetramine) into one of the phases that are used to make the emulsion should increase the...

21 February 2021 8,680 1 View

How to determine number concentration of polymer solutions using viscosity experiment?

I have synthesized PNIPAM (Poly (N-isopropylacrylamide)) microgels, which are copolymerized with oligo-ethylene glycol based comonomers. I have to determine the exact number concentration for each...

19 February 2021 5,205 5 View

Our partners will collect data and use cookies for ad personalization and measurement. Learn how we and our ad partner Google, collect and use data. Agree & close