What is the best reference book on novel polymer matrix composites?

More Moslem Najafi's questions See All

How can one simulate agglomerated cork in ansys and which engineering model can provide the better results?

I'm going to simulate the structural response of a sandwich structure with agglomerated cork core under bending and compression loading. Is there any reliable information about the structural...

07 August 2019 9,939 1 View

Does anyone know how to define the water absorption of polymeric composites in Ansys/Abaqus?

I'm trying to define the water absorption of polymeric composites in Ansys/Abaqus. The problem I don't know is what should be considered in this regard?

09 October 2018 2,046 2 View

What are the possible ways to improve water absorption of the polyester based composites?

Matrix and fiber/matrix interface degrade due to water absorption. Please suggest the possible methods to prevent such degradation by using additive materials such as nano-particles.

09 October 2018 9,196 0 View

How to define mechanical damage criteria for balsa wood in Ansys?

I want to define a proper damage criteria for balsa wood in Ansys in a simple way.

01 February 2017 6,153 0 View

How to define mechanical damage criteria for balsa wood in Ansys?

I want to define a proper damage criteria for balsa wood in Ansys in a simple way.

01 February 2017 852 0 View

How can we create a better bond between aluminum 5083 and glass fiber reinforced plastics?

I am trying to create the proper bond between a thin plate of aluminum 5083 and glass fiber reinforced polyester, but after a while, delamination occurs

31 December 2014 7,230 6 View

Is there some experimental works on durability of basalt fibers reinforced polymer in high temperature environments?

I am looking some research works on high temperature application of basalt fiber in combination with thermoset or thermoplast polymers.

31 December 2014 1,164 2 View

Adhesion strength of coating?

How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...

10 August 2024 942 3 View

How to define an anisotropic material with asymmetric elastic compliance/stiffness matrix in ANSYS APDL?

I need to model an anisotropic material in which the Poisson's ratio ν_12 ≠ ν_21 and so on. Therefore, the elastic compliance matrix wouldn't be a symmetric one. In ANSYS APDL, for TB,ANEL...

09 August 2024 5,048 2 View

Is it true that $\det(V(A))$ may be only $\pm 1$, depending on $n$, for the last symmetric tridiagonal matrix $A$?

One can try to generalize the Vandermonde determinant in the following direction: Let $A$ be any symmetric $n$-order square matrix. Consider its powers' diagonal elements $(A^k)_{ii}$ and...

08 August 2024 6,690 1 View

How to increase simulation box size?

We intend to study the interaction between peptides and polymer (like PP, PE and PS) through MD simulations using Martini force fields ( Martini 2 for PP and Martini 3 for PE, PS). We have...

08 August 2024 4,842 0 View

What is the prepared reference material that can be used in inductively coupled plasma optical emission spectrometry (ICP-OES) to measure REE and U ?

What is the prepared reference material that can be used in the ICPE-9820 Shimadzu Japan instrument, which employs inductively coupled plasma optical emission spectrometry (ICP-OES) to measure...

06 August 2024 1,896 1 View

How to heat polymer for about 130° without oil bath ?

is there any other way to heat a polymer evenly other than oil bath if so what are those and how to use it

06 August 2024 947 1 View

Usage of internal standards in LC-MS/MS analysis?

Have you ever seen a LC-MS/MS method uses both internal standards and external standards (in matrix matching purpose) but the concentrations of internal standards are outside the calibration curve...

05 August 2024 3,084 6 View

Do you know any references for analyzing stochastic fiber orientaion composites ?

Hello everyone I am looking for one or some books for propertes and behaviors of stochastic fibre orientation composites. unfotunately I could not find any suitable reference for thias by...

04 August 2024 3,461 3 View

Request a single Lecture notes for math as detailed as this that I can find in one place?

- The Existence/Uniqueness of Solutions to Higher Order Linear Differential Equations - Higher Order Homogenous Differential Equations - Wronskian Determinants of $n$ Functions - Wronskian...

03 August 2024 2,366 0 View

Tissue homogenization in mouse with FastPrep-24™ 5G - is the D matrix system useful?

I need to lyse and homogenise mouse tissues. So far I have experimented with liver and lung tissue, using matrix D. The liver was completely lysed with 6 repetitions of the standard program, but...

31 July 2024 9,186 0 View