What is the best method to solubilize the PTFE (Teflon) ?

More Adarsh Mallikarjun Kalla's questions See All

How can i estimate encapsulation efficiency of microencapsulated zinc powder ?

the powder is produced by spray drying and wall materials used are gum arabic and whey protein isolate.....

11 December 2018 4,446 1 View

What is the size of alpha-cellulose?

i have extracted cellulose from the coconut shell powder after delignification and removing hemicellulose what would be the size of these particles and how to check the purity of obtained cellulose?

11 December 2018 1,840 1 View

Weather polyvinyl alcohol is missible with protein poiymer like zein or milk protein like casein or whey?

Polyvinyl alcohol polymer is a hydrophilic polymer weather it form missibe solution with milk protein like casein or whey protein or zein poyymers?

10 November 2018 1,238 0 View

How to disperse of titanium dioxide in PTFE ?

Please can any one give me a appropriate method to disperse the titanium dioxide (anatase) nano particles (

09 October 2018 4,536 5 View

What would be the cost of thermoinetic mixer?

more specifical ----model MH - 50H can you give me its specification adn prize and where can i buy i india

07 August 2018 509 1 View

Wht is the stricking difference between wood powder and coconut shell powder?

how wood powder (i mean to say any tree trunk powder) is different from coconut shell powderd

04 May 2018 2,595 1 View

How important is the glass transistion temperature (Tg) for food packaging films?

how Tg effect the characterstics of food packaging films? which is the best Tg for selection of packafing film?

01 February 2018 511 4 View

I want to make concnut shell powder and acacea gum mixed biodegradable cups so now i want to mould them in cups which method would be approprite one ?

the cups formed should be rigid please suggest an appropriate method or machine to formcups out the paste of coconut shell powder and acacea gum.

31 December 2017 1,799 0 View

Weather Poly vinyl alcohol can be used as a moisture barrier coating?

I was going through an article on PVA by chemical and testing assessment 61st JECFA , where they have mentioned PVA to be moisture barrier and mentioned that it can be used in high moisture foods...

11 December 2017 5,296 1 View

The water is considered to be best PCM (Phase change material) but why researchers are trying other PCM's do you think water as PCM has drawbacks?

I have reviewed some of the research papers they have used alkane based PCM's (paraffin) and E-12 for cold storage application, why not go for water as PCM which has high latent heat of fusion...

10 November 2017 9,798 11 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What solvent can I used for Paal Knorr reaction between 6-amino hexanoic acid and 2.5 hexanedione?

I am try to make the Paal Knorr reaction between 2.5 hexnedione and 6-amino hexanoic acid, my problem is type of solvent to use, because 6-hexaminohexanoic acid is soluble in water but I am not...

02 March 2021 4,443 2 View

How to polymerize TEOS?

I want to polymerize TEOS on a surface. I know that NH4OH is a preferred catalyst and an alcoholic solvent should be used .But I can not find certain amounts of each material to use. Does any one...

02 March 2021 1,404 6 View

How can extract ciprofloxacin hydrochloride disolve in water er to organic solvent such as dichloromethan or any other solvent?

I need a procedure to extract the ciprofloxacin hydrochloride from aqueous solution by using dichloromethane in detail,. I thank you very much.

01 March 2021 4,306 1 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

How to separate water from glycerol solvent in a solvent recovery vacuum distillation column?

I am currently doing my third year design project. I have been assigned to design a glycerol recovery column in vinyl acetate monomer production. The process unit before the recovery column is an...

01 March 2021 9,525 4 View

How to remove the residual PDMS on the silicon mold?

Incompletely cross-linked pdms are difficult to remove.

01 March 2021 798 3 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

Carlos Araújo Queiroz

You may want to check this somewhat related RG discussion: https://www.researchgate.net/post/What_are_suitable_solvents_to_dissolve_Teflon_Estane_and_Viton

Adarsh Mallikarjun Kalla

sir, can i dissolve in ethylene glycol

Sir, please share the complete procedure how to solubilize the ptfe, at atmospheric pressure, so that in simple means, i can dissolve PTFE