This knowledge is required to study heat transfer in an agitated vessel.
I need to show that my predicted data in +or- something in error range when I vary the predicted data with experimental data.But in excel it is not easy .KIndly help. I need to lead in step by...
06 July 2019 1,022 3 View
06 July 2017 3,305 0 View
05 June 2015 1,481 0 View
I need to learn the basics of programming in matlab to simulate heat transfer problems.Please suggest me some books in this regard.
31 December 2014 5,337 7 View
Actually, I got some temperature vs time graph for simple water samples. I need to get the thermal conductivity of those water samples only with that temperature-time profile.
04 May 2014 1,456 4 View
I want to work on Turbulence modelling.
31 December 2013 2,769 7 View
Your benevolent suggestion will help me a lot in my future study and research.
31 December 2013 8,757 7 View
There are lots of nanofluids which show extraordinary heat transfer enhancement. So my question is what is the best nanofluid among them which can be used for cooling purpose in HV's?
10 November 2013 1,181 7 View
Actually I want to publish a paper but I am not able to find journal which has good impact factor and offers publication free of charge.
10 November 2013 8,576 0 View
I would like to know if there are any exceptional nanofluids that have great thermal resistivity and very good thermal conductivity. Ones that can be used for thermal insulation purpose.
10 November 2013 7,188 3 View
Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...
01 March 2021 7,168 9 View
Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?
01 March 2021 9,785 3 View
I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...
01 March 2021 6,450 5 View
I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...
28 February 2021 8,626 3 View
Hello, Is it possible to use pUC19 as a transfer vector to be packed in using the second generation viral particles packaging system( pMD2.G; psPAX2 plasmids)? As far as I understand it there is...
28 February 2021 4,868 2 View
Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...
26 February 2021 6,253 3 View
Hi I am very new to proteomics analysis. I have got raw files from core facility running thermofisher TMT 16plex 4 hours. I cannot find on maxquant the option TMT16Plex there is only up to 11...
25 February 2021 1,675 3 View
I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium
24 February 2021 1,915 1 View
I'm doing a cfx simulation of a multiphase flow in pultrusion and i set the Interfacial Area density in the heat exchange of a porous medium in this way IAD=Total fiber lateral surface of fiber...
23 February 2021 6,043 1 View
Hi I am working recently on a project where I have to study how the thermal properties or heat transfer enhancement of nanofluids as the volume fraction changes, or if a magnetic field is applied...
22 February 2021 961 2 View