What are the true stress- true strain curves at different temperature for Ti-48Al-2Cr-2Nb alloy?

Hi everyone Can anyone please share the stress-strain curves for TiAl based Ti-48AL2Cr-2Nb alloy for thermomechanical analysis in ANSYS.

31 December 2017 8,503 0 View

What are the Grain size of Alpha and Beta phases at 750oC in Titanium aluminide (Ti48Al2Cr2Nb) alloy ?

08 September 2017 6,316 0 View

Influences of the temperature on vonmises stress and principal stress in laser melting of Titanium alloys?

Hi everyone I have done the simulation of laser remelting process on titanium alloys. I want to know how does the temperature effects the vonmises stress and principal stress. Also, please do...

07 August 2017 8,188 1 View

Can any one suggest me the material modeling in ansys APDL?

01 February 2017 5,897 0 View

Element birth and Death technique

Can you anyone help me regarding element birth and death technique. My questions 1) what is the value of Stiffness multiplication for transient thermal analysis in element birth and death...

04 May 2016 6,675 4 View

How do I couple the transient thermal analysis with structural analysis in ansys for finding the thermal stresses?

11 December 2015 9,234 4 View

What are the properties of Nitinol materials such as temperature wrt conductivity, specific heat and density?

03 April 2015 2,993 5 View

Is There Any Feasible Method To Test Fluorescent Compounds Other Than Fluorescence Spectrometers ??

Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !

02 March 2021 5,785 3 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View

Why initial concentration of Pb not the same as calculated one when testing using AAS?

I am currently doing research on the adsorption of heavy metal using magnetic reduce graphene oxide. I use AAS to determine the concentration of the heavy metal. I prepare the Pb solution with...

26 February 2021 9,580 4 View

Is this the write procedure for acid digestion of soil for heavy metal analysis using AAS?

How to do acid digestion of soil sample with 3:1 aquaregia in an open vessel?

23 February 2021 3,053 7 View

Can a semi-conductor material have different absorption coefficient?

Does the absorption coefficient of the semiconductor changes with the change in the structure of the semiconductor? If you have a thin film and nanowire of the same semiconductor, will the...

23 February 2021 9,799 4 View

PMSM Inter Turn Short Circuit fault, Dataset?

Hi, I'm looking for a dataset of a PMSM with an inter turn short circuit fault. Does anyone know a dataset which is available?

21 February 2021 5,663 2 View

How can I simulate the optical absorption spectrum of a biomaterial (like DNA or protein) in COMSOL?

I need to simulate the optical properties of a biomaterial, namely DNA, in COMSOL. Basically I need to simulate the IR absorption spectrum of a cylinder filled with a 'concentration' of DNA. I am...

21 February 2021 3,043 3 View

absorption= 1-mag(S(FP1:1,FP1:1)*S(FP1:1,FP1:1))-mag(S(FP2:1,FP1:1)*S(FP2:1,FP1:1)) is it correct for absorption ?

hi everyone I am simulating a unit cell structure in HFSS using Flouquet port having two modes for absorption I have used this formula:- absorption=...

17 February 2021 9,178 2 View

Unusually Busy Raman Background?

Hello, I am observing a nearly periodic background spectrum for a wide variety of SERS substrates. I see this response (attached below) for bare Au films, Cu films, and Au nanoparticles on...

15 February 2021 9,922 5 View

How to detect uv vis spectrum of nanoparticle under 300nm?

I try to make the indium nanoparticle and check the uv vis spectrum. I heard that In nanoparticle has surface plasmon resonance peak at 200~300nm. But most of solvent has absorption peak under...

14 February 2021 6,950 15 View