What is your opinion about magnetic abrasive finishing (MAF) and is it suitable for manufacturing parts in medical applications?

Magnetic abrasive finishing (MAF) is one of advanced process which is used to machine and enhance the surface layer of parts .

10 November 2018 3,864 0 View

What is the value of the limited depth to which form errors, tapers, looping can be corrected by MAF process?

Which depth can be reached by magnetic abrasive finishing (MAF)?

10 November 2018 1,414 0 View

Are schools providing students with suffcient, well-trained guidance counselors?

Before university Are students prepared for college?being prepared for college means,at a minimum, having the English and math knowledge and skills to succeed in entry-level, credit-bearing college

04 May 2018 10,073 18 View

Do you recommended to use only the textbooks in Lecture ?

The textbooks in lecture.

04 May 2018 7,172 3 View

Are you alarmist about your country future?

many peoples were alarmist about their countries (decreases of water resource, natural resource, oil resource...)

03 April 2018 4,640 19 View

What have you learned from the process of doing your PhD?

What have you learned from the process of doing your PhD?

03 April 2018 2,570 14 View

What are the limitations you have faced while writing PhD thesis?

The limitations in writing PhD thesis.

03 April 2018 2,666 23 View

No title

02 March 2018 9,751 7 View

How to convert mild steel into high carbon steel ?

Convert mild steel into high carbon steel

02 March 2018 3,811 2 View

What is the Difference between Production and Manufacturing?

Difference between Production and Manufacturing?

02 March 2018 1,253 7 View

How to define and get results (stresses) for certain points of a model in abaqus, using python? When the size of the model changes?

I want to do a parameter study of a aixsymmetric cylinder in Abaqus. I want to create several jobs where I get the stresses for 3 different points in my model. These points are defined. I wrote a...

01 March 2021 10,078 1 View

LOAD DISPLACEMENT CURVES Stiffness increasing in ANSYS non linear analysis. HOW CAN I CORRECT IT?

Hi. I am doing non linear FE analysis using a new material beam under flexural 2 point loading using ANSYS. I have defined a bilinear material model. The solution has converged. In results I am...

01 March 2021 9,911 3 View

How relevant is Mini slump cone?

for all the rheology researchers, my question is, how relevant is a mini slump cone (smaller than a standard 50 cent rheometer). currently based on testing, the thickness of slumped material is...

26 February 2021 3,668 1 View

Stress/strain tensors decomposition ???

25 February 2021 6,760 1 View

How to reduce residual stresses in MD simulation?

I am working on a preparation of representative polymeric structures of some popular polymers, such as polyimide or PTFE for MD simulation, during which a single nitrogen or oxygen atom will be...

24 February 2021 8,105 3 View

Suggestions for occupational stress surveys?

I am currently writing a masters thesis on reasons for occupational stress in the early childhood classroom, and want to include a short survey assessing participants work-related stress levels. I...

24 February 2021 8,678 2 View

What should be the duration of exposure to simulated space environments with Rodents?

Hi, I am currently working on a pilot study to get some data related to the impact of long duration spaceflight to the microbiome and the immune system. I plan to use rats and simulate...

22 February 2021 592 1 View

What are effects of steel jacketing on flexural strength?

Dear all, If steel jacketing is used to retrofit a reinforced-concrete (RC) column, can we use it to improve flexural strength? I understand that we leave gaps between the ends of the jacket and...

22 February 2021 1,906 5 View

The most suitable method to calculate the stress intensity factor in the presence of contact between the crack lips?

I'm trying to study cracked structures under a compressive load taking into account contact between the crack lips. I would like to know if the method of extrapolation by displacement remains...

21 February 2021 8,694 4 View

How to assign two different material/section properties in Abaqus(UMAT)?

Hi everyone, I am conducting a non-linear multi-layer pavement structure analysis which is a stress-dependent. So far, I am able to define the nonlinearity for one soil layer for its resilient...

11 February 2021 9,607 3 View