What is the status of bread making and more bakery foods with the use of insect flour/powder?

Insects have been consumed by human diet since prehistoric times. At present, the idea of looking at insects as food has been getting traction worldwide, also in response to increasing food...

03 March 2021 6,223 5 View

What is the best method for removing power-line interference (PLI)?

In the paper A wavelet-based method for power-line interference removal i... we propose a new method for removing PLI. This method consists in identifying the ECG and noise frequency range for...

29 December 2020 9,233 3 View

How to reconcile two sets of qPCR data from the same sample but acquired with different parameters (Ta, primer cc., etc.)?

17 November 2020 4,272 3 View

No title

Hello! I'm currently studying the influence of adding a mass in a cantilever tip, near to a bifurcation. In order to do it, I simplified a model of the cantilever to a 1DOF...

06 November 2020 3,843 3 View

FTIR new peak assignment Ge np coated with Oleylamine?

Dear All, I've been synthesizing Ge nanoparticles using OAm as a solvent/capping agent. Now I'm in the process of assigning the FTIR peaks of my samples. I've assigned almost every peak in the...

02 November 2020 4,227 2 View

What are the main taxa of above ground arthropods in a silvopasture system in the tropics of Latin America?

Beside dung beetles, I would like to learn more about the diversity of arthropods in silvopasture systems where livestock are kept on rotation. Also what about arthropods diversity in similar...

31 October 2020 6,632 1 View

Can I perform a Benjamini Hochberg FDR correction over p values from different tests?

I'm performing statistical analysis on a time series data, comparing the average amplitude (y axis) between three groups on every 50 ms (x axis). The time series is 1200 ms long (so in total 24...

21 October 2020 3,269 3 View

If sustainability is taught at your university in what department the sustainability course/s is housed? What focus/i has the course/s?

Sustainability is a multidisciplinary field and thus, I am interested in learning what emphases are given to sustainability courses in curricula at universities around the world.

19 October 2020 5,621 11 View

What are the basic to state-of-the-art methods for INDOOR temperature interpolation from sparse measures?

Hello, I'm about to start a new industrial project in which we want to estimate (interpolate) the INDOOR temperature at unknown 3D positions in possibly complex 3D room geometry based on sparse...

28 September 2020 4,137 3 View

Communicating though Python module PyVISA to Keithley sourcemeter and nanovoltmeter, GPIB address?

Currently I am working on the acquisition of electrical contact resistance, for which I will be using a Keithley 2400 sourcemeter and a Keithley 2182a nanovoltmeter. Both of the instruments are...

23 September 2020 4,959 2 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Why can't make aluminum nitride film successfully by use sputter?

We use reactive sputtering process to make aluminum nitride film, and want to make c-axis aluminum nitride film on a silicon substrate, but the crystal orientation cannot be seen with...

03 March 2021 7,975 3 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

12% ledeburitic cold work tool steel, etched for revealing retained austenite, any help for clarifying?

Hello everyone. Given microstructure image belongs to a 12% ledeburitic cold work tool steel (annealed and tempered). The sample was etched with picral (100 mL ethanol and 4 g picric acid). I...

02 March 2021 4,119 3 View

How to quantify carbon deposition on CuZnAl catalyst?

Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...

01 March 2021 1,907 3 View

Why Trivalent chromium start precipitating above PH 5 ? Moreover discuss difference between adsorption of chromium and precipitation of chromium ?

I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...

01 March 2021 5,475 2 View

How Can I bring as much common elements in steel as possible to calculate stable phase(s) in OpenCalphad?

As I was tweaking step-by-step OpenCalphad6 Macros step1.ocm involving phase and thermal property calculation of a High-speed steel, I could not incorporate more than 6 elements in the steel...

01 March 2021 8,840 1 View

How can you bring two structures together to create an adhesive bond in LAMMPS?

I have created an Ice 1h crystalline structure and an Aluminium substrate structure and equilibrated both at 250K. Now I need to bring them together in a way that an adhesive bond is created....

01 March 2021 3,325 2 View

How to check the uv-vis absorption of nanoparticle by surface plasmon resonance?

I try to check the uv-vis absorption of Indium nanoparticle. Now I am measuring in solution, can I measure it in the form of a film?

01 March 2021 930 3 View