software
Hello all, I want to simulate a Dielectric Elastomer Actuator DAE (an electrostatic-Structural analysis). I want to apply various voltages and frequencies into the DEA in the form of sine wave....
13 February 2021 3,261 3 View
Dear colleagues, I am new to R, I have been using Amos for conducting CFA but came to learn that when dealing with Likert scale, Lavaan in R is a better tool to do such analysis. I started using...
30 December 2020 5,608 3 View
24 May 2020 7,998 3 View
It is suggested that FTIR or Raman spectroscopy is quiet useful to identify Microplastics extracted from samples. But when fibers are microscopic in size , then technical issues rises. For FTIR, a...
08 January 2020 1,312 4 View
I will like to determine the level of various reactive oxygen species produced from ticks as part of an experiment. Considering the unstable nature of different ROS and their ability to dissociate...
08 January 2020 3,773 3 View
I have inquiry about using the results of antibiogram and its antibiotic policies in certain health institution interchangeably with another health institution in the same city or every health...
19 September 2019 7,708 8 View
Please can anyone help with COMSOL. I am trying to simulate gas storage in a porous media but I am at a loss on how to go about it especially how to input my mass balance, momentum and energy...
30 July 2019 1,453 2 View
I want to conduct partial least squares structural equation modeling for my research in SmartPls software . So, is there anyone who provides me the step by step guide of conducting SmartPls...
28 May 2019 3,292 4 View
20 January 2019 5,001 2 View
I have 30 different geometries that will be subjected to the same fluid flow physics. Can i solve all at the same time in ANSYS workbench instead of each separately?
01 July 2018 9,685 3 View
for example, the energy content of ethanol is about 33% lower than conventional gasoline for equal volumes of fuel . The energy content of biodiesel is about 7% lower than that of...
17 September 2019 6,930 5 View
While Using ethanol and ethanol-isobutanol as a fuel additive to unleaded gasoline causes an improvement in engine performance and exhaust emissions.
07 February 2019 8,282 2 View
Hi, I'm working on a project to extract heat energy from vehicle exhaust gasses using Solid and Gel type thermoelectric modules. For this I've designed a heat exchanger with flat surface so that...
10 November 2018 7,987 3 View
Hi just started building a golf cart and data is as under Constants weight 300 to 400 kg max // tire size (R 20 width 8) drive train constant reduction 20:1 the cart will climb 7degrees of slope...
10 November 2018 5,489 1 View
The critical temperature for diesel fuel No 2 is around 720 K and critical pressure is around 20 bar.
08 September 2018 8,282 3 View
I am going to use dimethyl ether (DME) as an alternative fuel for diesel engine.
07 August 2018 5,111 2 View
I've tested the density of gasoline at fixed temperature for 10 times and the result showed that the density of gasoline increases like linear graph. So, I actually wonder what wrong with it?! (I...
07 August 2018 9,141 3 View
A low-carbon fuel standard (LCFS) is a rule enacted to reduce carbon intensity in transportation fuels as compared to conventional petroleum fuels, such as gasoline and diesel.
04 May 2018 380 2 View
Dear all, I want to find Euro 6 standard for light-duty diesel engine in g/kWh unit. Light duty diesel engine standards are in g/km... How can i find such standard or an equal one in g/kWh? Thanks
03 April 2018 3,446 0 View
Which is better? Ansys Forte vs AVL FIRE vs ConvergeCFD Thx
02 March 2018 7,957 1 View
