What are the standard methods of washing laboratory containers such as glass and polyethylene using dilute acid in the soil laboratory?

Sajad Bayat @Sajad-Bayat

14 May 2024 0 5K Report

I need standard laboratory methods for washing glass and polyethylene containers in the soil laboratory

With the best wishes

Sajad Bayat

Badges
Science topic

More Sajad Bayat's questions See All

Can someone introduce an article about the convergence of the temperature parameter for the SPH part in Abaqus software?

For the article, I need some references for the subject of checking the convergence of the temperature field parameter for the SPH part in Abacus, and I want to study this case with a few meshes...

13 June 2024 2,504 0 View

Can introduce an article to check the convergence and independence of the particle temperature with respect to the mesh in FSW welders?

I need help for my thesis.

24 May 2024 8,865 0 View

I need articles about the difference between the application of kinetic and static friction coefficients in FSW welding, Can introduce the article?

In FSW welding simulation in Abaqus, I need some articles to check the difference between friction application methods (penalty - kinetic friction and static friction).

24 May 2024 5,006 1 View

Which unsolved problem or question you have in mind about chaos and chaotic systems?

If you are a researcher working with chaos and chaotic systems, which unsolved problem or question you have in mind Here I have collected some open problems and questions related to chaos and...

28 April 2024 8,493 2 View

How can I get the coefficient of static friction - kinetic friction and temperature coefficient for alloy Ag31?

For thermal analysis of FSW magnesium alloy welding by SPH method in Abaqus software, I need static friction coefficients - kinetic friction and Decay coefficient. Can someone help me how to get...

22 April 2024 3,944 1 View

Hello How can I solve my problems in FSW welding temperature analysis?

I do the thermal analysis for friction stir welding in Abaqus software with SPH model. The problem I have is that the temperature of the particles is higher than the melting temperature of the...

20 April 2024 7,575 0 View

How to apply heat transfer coefficient in Abaqus for SPH model?

I am doing the thermal analysis of FSW welding. The heat transfer coefficient is applied on the surface, but our SPH part is meshed, how can I apply this coefficient? After finishing the analysis...

04 April 2024 6,325 2 View

Hello How can I solve my problems in FSW welding temperature analysis?

I do the thermal analysis for friction stir welding in Abaqus software with SPH model. The problem I have is that the temperature of the particles is higher than the melting temperature of the...

05 March 2024 6,462 2 View

Hello Can someone help me how to apply the convection coefficient in FSW welding simulation in Abaqus by SPH method?

Hello Can someone help me how to apply the convection coefficient in FSW welding simulation in Abaqus by SPH method? This coefficient is applied to the surface and we have 90 in SPH, how can I...

03 March 2024 6,319 0 View

Can someone help me regarding FSW welding temperature analysis using SPH method in abaqus?

The problem I have is one is the high temperature of the part, how to solve the problem with the difflux subroutine, and the other problem is how to apply the convection coefficient for the SPH...

25 February 2024 1,638 2 View

Fabrication of narrow glass capillary (inner diameter 200~500 nm)?

I need a very narrow glass capillary for my research. How can I make a glass capillary with an inner diameter of around 200 to 500 nanometers?

08 August 2024 8,915 0 View

Separation of organic acids-HPLC?

Hello What should be done to separate and identify organic acids in HPC when their RetTime is the same?Like oxalic acid with Propanoic Acid.or acids that have a very close RetTime.

07 August 2024 8,782 3 View

Determining the worth of a point improvement in Hamilton Depression Scale?

Dear readers, Thanks for your attention. I am wondering about the health economic problem of quantifying the value of interventions which a) prevent, b) improve symptom profile and c) ultimately...

05 August 2024 3,246 1 View

Project/Experimental assistance ？?

Do experiments on behalf of Our Business: Laboratory animal rearing Animal modeling Experimental animal behavior detection, image ultrasonic detection, electrophysiology platform Organoid...

05 August 2024 5,829 1 View

Short Synthesis of Graphene Oxide from Natural Graphite Flakes?

I am in search of a modified Hummer's method, which can be used to synthesis graphene oxide within 6-8 hours. As I am a student it is not allowed for us to work after 5 in the laboratory. So I am...

01 August 2024 8,368 2 View

Conjugation of PEG-Amine to an Amino Acid Using EDC?

I am attempting to conjugate PEG to an amino acid at the C-terminus, for the purposes of producing nanoparticles. I have been told that PEG modified with amine groups can be used for this purpose,...

31 July 2024 2,033 1 View

Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

Hi, researchers, Is it possible to use a safer acid instead of monochloroacetic acid to convert bacterial cellulose to carboxymethyl cellulose?

29 July 2024 4,570 0 View

In passive sampling, can polymer-lipid partition coefficients be applied independent of environmental salinity?

For example, if low-density polyethylene (LDPE) is equilibrated with PCB contaminated marine and freshwater sediments, can LDPE-lipid partition coefficients be used to obtain equilibrium...

28 July 2024 263 1 View

My cfDNA extraction protocol using silica beads works with plasma collected in COD SAGM bags but not with plasma collected in K2 EDTA tubes. Why so?

I am currently performing cell-free DNA (cfDNA) extraction from plasma using an in-house developed kit that employs silica-coated magnetic beads. My protocol works effectively with plasma obtained...

28 July 2024 3,559 0 View

Can you recommend provider Intermediate laboratory test for hydrocarbon, polyethylene & polypropylene?

Accredited laboratory of JV "Uz-Kor Gas Chemical" LLC (Uzbekistan) is looking for providers to conduct interlaboratory comparison tests on gas chromatographic analysis of hydrocarbons (component...

25 July 2024 8,108 0 View