Among all the environmental pollutants globally how much % out of 100% is due to chemists?

Environmental pollutants and hazardous are major issues through which the modern world is suffering. Among all the environmental pollutants and hazardous materials how much contribution is from...

31 December 2020 6,039 3 View

Among All the environmental pollutants how much % out of 100% are due to chemists?

Environmental pollutants and hazardous are major issues through which the modern world. Among all the environmental pollutants and hazardous materials how much contribution is from chemists (out...

31 December 2020 833 7 View

How to prepare selenium nanoparticles from selenium dioxide?

For the preparation of selenium nanoparticles mostly selenious acid is used however if someone try to prepare it from selenium dioxide what will be the proposed procedure or mechanism?? Is it...

07 December 2020 4,979 4 View

What are the exact phytochemicals present in the plant extracts which act as reducing and stabilizing agents in the green synthesis of Nanoparticles?

There are hundreds of research articles published on the green synthesis of nanoparticles of various metals and metal oxides nanoparticles using plant extract (where mostly the extract of leaves...

30 November 2020 735 6 View

How can I derive the Fresnel reflection coefficient in matrix form?

I need help in deriving the Fresnel reflection coefficient in matrix form for the 2 X 2 reflection matrices. After diligently searching online, I noticed I could get the steps in a book called...

11 October 2020 215 3 View

How to collect data for Regional Research Study?

08 October 2020 8,003 4 View

Can we test the same hypothesis by using two different techniques Regression analysis (SEM) and Variance analysis (ANOVA)?

I have model where I have four dependent variables in nomological order and 3 independent continuous variables . To test casual relationships I first compared means of outcome variables across...

19 June 2020 7,764 8 View

Is there an Instrument to Assess Faculty Members Readiness to Implement Knowledge Management?

I am searching about an Instrument to evaluate readiness of faculty members to implement knowledge management?

01 March 2020 5,394 3 View

Could you please help me by solving the following integration?

Dear Colleagues, I'd be grateful if you provide me the solution or give an idea to solve integration. Thanks in advance. Huda

12 February 2020 1,989 15 View

What is the best way to approach a scientist for Post Doctoral research position?

I have completed my Ph.D. During Ph.D., I had worked on various aspects of the pathogenesis of Candida glabrata. However, in Post Doctoral studies, I want to work on immunological aspects for the...

11 February 2020 4,482 8 View

Why the results when using wall thickness and when using shell conduction are different in ansys fluent?

Actually, I am running cfd simulation for a heat exchanger which has two fluids one hot and other one is cold fluid. there is a solid domain between them, which I removed and instead I have used...

01 March 2021 9,537 2 View

How much pressure we can reduce at the outlet to avoid Reverse Flow?

I am simulating Heat Exchanger. I have tried and tested all the methods to resolve this issue from the internet like refining mesh, improving skewness and orthogonal quality ,extending outlet to...

01 March 2021 6,985 3 View

What are the countries most affected by extreme rainfall as a result of climate change?

Increased heat, drought and insect outbreaks, all associated to climate change, have increased wildfires. Decreasing water supplies, declined agricultural yields, health impacts in cities owing to...

01 March 2021 7,168 9 View

What is recommended for solid domain in ANSYS FLUENT?

Should I mesh the solid domain ? or should I use wall thickness? or Shell conduction? for Heat Transfer between two fluids of a Heat Exchanger. what is recommended?

01 March 2021 9,785 3 View

Heat exchanger with liquid Nitrogen as coolant?

I want to cool Natural Gas from 195 Kelvin to 138 Klevin in a heat exchanger by using liquid nitrogen as the coolant medium. When entering the heat exchanger, the liquid nitrogen will have a...

01 March 2021 6,450 5 View

How can i resolve the "final solutuin is not converged" error in Comsol for my heat transfer simulation??

I have been trying to simulate heat transfer problem in Comsol 5.5 for long time but it always throw an error stating: "Failed to find a solution. Maximum number of Newton iterations...

28 February 2021 8,626 3 View

Exit velocity of natural gas from pressurized tank?

Hi Guys. I'm a mechanical engineer and have a bit trouble, would be very glad if you could help me with my questions. I have a pressurized tank which contains Natural Gas at 200 Bar and 293...

26 February 2021 6,253 3 View

Anyone that can help with Maxquant TMT16plex which is missing?

Hi I am very new to proteomics analysis. I have got raw files from core facility running thermofisher TMT 16plex 4 hours. I cannot find on maxquant the option TMT16Plex there is only up to 11...

25 February 2021 1,675 3 View

How do you mesh a thin solid in Fluent?

Hello, I have used the shell function on SpaceClaim to create thin solids for the model I am studying. These are contained within an enclosure for my study. I chose this approach as it avoids the...

24 February 2021 8,856 3 View

How to properly calculate the fluid solid heat transfer between polypropylene matrix and glass fiber in a porous medium?

I'm building a cfx model of thermoplastic pultrusion process on ansys and i have a doubt on how is the proper way to set this parameter in a porous medium

24 February 2021 1,915 1 View