What are the recent polymers could be used for aerospace (Low cycle fatigue) applications and also could be fomed by Additive Manufacturing?

More Amit Kumar Singh Chauhan's questions See All

How to show a protein is being dimerized in SDS-PAGE gel?

A protein dimerizes through CTD. I have expressed CTD of protein with two different tags. Now, I want to show that these CTD of protein dimerize in a pull-down assay. But my doubt is that if the...

29 January 2021 7,529 4 View

Similarity between these two waveform? Similarity in terms of Shape?

Hi, These are the outputs generated by a system. Green-colored (nr) is desired output, while the system generates Red-colored (nf). I also have a dataset in CSV file. For this waveform, What...

21 January 2021 929 2 View

Which kind of GPC solvent can be used to dissolve both lipid and salt?

I want to find a GPC available solvent to dissolve both lipid (DPPC, 2 mM) and salt (NaCl, 100 mM).

14 January 2021 3,805 2 View

Which one is best theoritical model that takes account interfacial thermal resistance while predicting thermal conductivity fiber/polymer composites?

Hello Everyone, I want to know about best analytical model that consider the interfacial thermal resistance which predicting the thermal conductivity for fiber/matrix composites. Here, Best...

30 December 2020 6,375 2 View

What are the impacts of pKa1and pKa2 in drug absorption ?

Pregabalin is a crystalline solid with a pKa1 of 4.2 and a pKa2 of 10.6. what insight can i get from this aforementioned information during drug design. What is the difference between pKa1and pKa2.

28 December 2020 7,237 3 View

How to deal with negative factor loadings while performing PCA-MLR to calculate quantitative source contribution in air pollution studies ?

If I am getting some negative values in factor loadings while performing principal component analysis (PCA), then I should use that negative values to calculate daily source contribution using...

22 December 2020 5,248 1 View

What are the source markers of Naphthalene, Acenaphthylene and Acenaphthene in ambient atmosphere ?

Is any article available which reports the sources of these PAHs ?

22 December 2020 8,738 1 View

Sample does no retain in the well while doing NATIVE Gel electrophoresis?

While doing NATIVE-Gel electrophoresis with electrophoresis buffer containing 25mM Tris, 192 mM glycine, and rest water if the sample being loaded is dissolved in methanol it won't remain in the...

15 December 2020 4,999 3 View

Hybridoma stops producing antibodies after thawing from liquid nitrogen?

Dear scholars, Our research is currently involved with hybridoma technology. We have isolated some original clones after fusion and we are preparing the subclone step to find some true positive...

01 December 2020 1,178 3 View

Why high infiltration in OM treated plot?

We are carrying out trial in the glasshouse where we are comparing the infiltration rate in sodic soil in two different treatments Polyacrylamide vs organic matter ( lucerne pellet). within 27...

25 November 2020 8,787 3 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

MD MOE RMSD

How to calculate the RMSD values for a MD simulation using MOE?

07 August 2021 0 0 View

fatal error

When I tried to energy minimization my system, I got fatal error as below. Fatal error: Atomtype opls_116 not found Although I've already added this line: ; include water #include "oplsaa.ff/spc.itp" to [molecultype] directive in my topology.

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

fatal error

16 June 2021 0 0 View

flexibility of polymers chain

effect of double bond on the flexibility of polymers

07 April 2021 0 0 View

Formulation of polymer color flakes

I am writing to request some information for making polymer color flakes. I would appreciate the help.

17 March 2021 0 0 View

Polymer composites suddenly solidifies?

I am making polymer composite by solvent mixing method. When I am trying to add filler solution in polymer solution it quickly get solidified. How to make them then uinform? It doesn't give time...

03 March 2021 7,540 4 View

What is the production process of CaFe ferroalloys?

I looking for ferro calcium production process

03 March 2021 1,755 4 View

Dmitrii Rusakov

Polyetheretherketone (PEEK) can be used for aerospace application. https://apiumtec.com/en/3d-printer/

This is FFF 3D printer for PEEK.

Hasan Sinan Bank

You may want to check carbon fiber imbued materials (e.g., Nylon) or there are some printers which can also print kevlar with different plastics (see MarkForge)