What are the reasons for Infertile and empty' seeds in the Cuminum cyminum L?

More Moslem Abarian's questions See All

The best source of Arginine for the synthesis of polyamines?

what is the best source of Arginine for the synthesis of polyamines?

17 June 2023 7,877 1 View

How to Production of polyamine biostimulants?

07 June 2023 9,553 0 View

How to evaluate the Antibiofilm effects of nanoparticles against Candida Albicans ?

how to evaluate the Antibiofilm effects of nanoparticles against Candida Albicans with an efficient and simple method?

09 October 2019 3,594 3 View

How can one simulate agglomerated cork in ansys and which engineering model can provide the better results?

I'm going to simulate the structural response of a sandwich structure with agglomerated cork core under bending and compression loading. Is there any reliable information about the structural...

28 August 2019 3,055 2 View

What adhesive can be used to bond several polyurethane foam plates together?

I'm attempting to bond several solid polyurethane foam plates with different densities, but I want to know that which type of adhesive is proper to do it? Epoxy, polyurethane, …?

25 August 2019 5,347 4 View

What are the effective materials for its capacity on the absorption of phenolic compounds excreted from explant cut?

What are the effective materials for its capacity on the absorption of phenolic compounds excreted from explant cut, to prevent the occurrence of browning during tissue culture and...

29 July 2019 5,759 6 View

What is the best software for simulation of wood structure?

Hi What is the best software for simulation of wood structure such as balsa or cork? I think that conventional softwares some times is not good for them.

11 December 2018 8,269 13 View

Hi there. is there any course for scorpion milking?

Iran is country with divers ecology. In every climate we have special genus of scorpions. we need to know more about their venom ingredients but I need a course to teach me how can I grow...

15 April 2018 1,302 3 View

How can we produce a bioluminescent plant?

Is it an industrial form of plants that can produce light like firefly using a gene transfer method? I know that this is a complex chemical and biological mechanism, but is there a better and...

21 January 2018 1,721 3 View

What is the accurate procedure for identifying AHLs (Quorum sensing signals) through TLC method?

Hi everyone I work at a project contain detecting AHLs from an activated sludge process (lab-scale) but despite all efforts I could not see any color on the TLC plates. My protocol is...

23 December 2016 7,859 2 View

What is the reason for current dropping in OER , LSV curve?

I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...

10 August 2024 3,629 1 View

What may be the reasons for failures of Tube toi Tube Sheet Joints in Boiler Drum ?

We have observed that tube to tube sheet joint leaked in our boiler and needs to overcome same by knowing the root cause.

08 August 2024 3,161 0 View

What is the most effective way to sterilize camelina seeds?

I'm working on camelina seed sterilization and have some doubts about the process. I followed a protocol used by my lab mate, but I'm unsure about a couple of things: Is it safe to use 10% bleach...

02 August 2024 1,178 3 View

What is the problem with these tissue culture plants?

All plants are green but some of these plants becomes yellow. I did not found any reason. Please help me to find out the real problem.

01 August 2024 589 4 View

When should I stop watering A.thaliana for collect their seeds?

I have been following Rivero et al 2014 protocols, but I am not sure when I should stop watering because my plants are completely yellow but the siliques are not 80% brown. Any recommendations?...

30 July 2024 2,301 7 View

Reason for discontinuities in my Band structure?

Hey All! I am wondering what might be wrong with my band structure. I did the calculations using VASP and plotted the results using Origin. Although I have tried changing various input...

25 July 2024 2,920 11 View

How should I prevent mould contamination on small seeds in a petri dish exposed to warm temperatures?

Hello all, Recently as part of a research project at university, we have been studying the effects of light and temperature on eucalyptus seed germination. In our initial run of trials we...

24 July 2024 8,850 4 View

Is it fare for editors of reputed Journals to put on hold manuscripts more than six months without review updates, Are they harassing researchers?

It is being seen that Editors of some reputed Journals are putting on hold the manuscripts and not updating review states even passing more than six months from submission. Researchers are...

24 July 2024 8,596 2 View

HEC 1A & HEC1B Cell Lines?

Hi, Kindly guide me that how many cells of HEC1A & HEC1B Cell lines should I seed for Wound healing assay and which plate type is recommended 6, 12 & 24?. Articles suggested mainly 24...

20 July 2024 4,143 2 View

Has anyone tried freeze flow samples in -80C freezer or liquid nitrogen before processing?

Our lab has some radioactive cell samples that need to be kept frozen for at least 30 days before flow analysis. For some reason, the samples stored in liquid nitrogen did not perform as well as...

15 July 2024 9,975 1 View

Toluwase Righteous Odefemi

https://pdfs.semanticscholar.org/43b4/fb49f24cb079259e884935e6bab528f24623.pdf

Moslem Abarian

@ Toluwase Righteous Odefemi , thank u for your answer, according to my studies, acclimate factors and Irrigation is most effective than soil properties for Infertile and empty' seeds