explain your idea
Daer Ahmed Kadhim Hussein
- The CNT may toxicity when used high concentration inside human body
- Environmental Risks ( specily in respiratory system )
Sincerely
Highly agglomerate in matrix (dispersion problem)
Loss of inherent properties
what are scaleup factors in ODF dosage forms
CNTs:
- absorb light
- increase viscosity
- may have adhesion and dispersion issues
- are more expensive than carbon black (CB)
- have a lower percolation threshold than CB or spherical nanofillers (can be also an advantage, depending on application)
Carbon Nanotubes have just as many disadvantages as graphene does.
-Huge Regulations
-Labeled as a toxic substance
-Hard to manufacture
-Dispersion issues
-Market is controlled by a few players
-Could be as dangerous as asbestos:
https://particleandfibretoxicology.biomedcentral.com/articles/10.1186/s12989-020-00390-y
Also I would like to mention that all nanoparticles/nanomaterials like carbon nanotubes can be manufactured to be safe, nontoxic, and affordable. It all depends on the materials, process and type of functionalization.
Is There Any Feasible Method To Test The Efficiency Of Fluorescent Compounds Other Than UV Spectrometers ? Suggestions Would Be Appreciated !
02 March 2021 5,785 3 View
Dear all, I just saw this example in FB on the difference between laminar flow and turbulent flow. The flow from a pipe hits the sink and scattered. The flow from the pipe is characterized as...
02 March 2021 1,999 5 View
I am at the beginner level in drug design and drug discovery, and I am interested to learn more about this field. Which books are highly recommended to start from and gives me all essential...
02 March 2021 8,437 2 View
Could you please recommend some good journal that accept very long revie papers (approximately 6000+ words) in neurosurgery, cancer biology ?
01 March 2021 8,087 3 View
I want to differentiate between normal and abnormal movement. For this reason, I am looking forward to this type of dataset.
01 March 2021 9,485 1 View
Hello, I am writing a python script to generate my model and write the input file. The problem is I have 1000 elements in my mesh and I want to assign different material properties to each...
01 March 2021 9,511 3 View
Hello, Could you please share any interesting research explaining how to choose the number of hidden layers and nodes per layer in case of regression problems using ANN? Thank you, any help would...
01 March 2021 6,200 3 View
In Finite element software like ANSYS , there is difficulty in obtaining direct results of twisting of concrete members because SOLID65 which is the unique element designed to represent concrete...
26 February 2021 3,806 2 View
Hello everyone, I have some PHAs blended with fillers and nucleating agents, yet I don't know what kind of fillers or nucleating agents. The producer has shut down and there's no way to get in...
24 February 2021 1,356 8 View
Using GDB, it is straightforward to debug and monitor a target program by setting a break-point at a specific instruction, since the instruction addresses are known. However, we have two...
24 February 2021 1,598 2 View
In current time of many changes in business and world of work, a lot is said and reported about the importance, skills and benefits of leadership. Are soft skills becoming more and more important?...
02 March 2021 8,149 3 View
Dear All, I want to quantify carbon deposition on the surface of the CuZnAl catalyst. I have tried thermogravimetric analysis, but I've got weight gain as the active Cu- get oxidised. Does anyone...
01 March 2021 1,907 3 View
I am a student of MS Environmental Engineering and started my research phase. I am working on metal removal ( chromium iii ) by using activated carbon prepared from the agricultural feedstock. So...
01 March 2021 5,475 2 View
Dear all, I am trying to perform a MD simulation about the interaction between CO2 and a polymer. I create my model, solvate it and perform the NVT and NPT equilibration. Now I am not able to...
26 February 2021 10,014 3 View
I am working on TiO2 composite material and the results of XRD have a lot of small/junk peaks and while I apply a smooth filter in Origin then the other characteristics peaks disappear so anyone...
26 February 2021 8,183 3 View
Has anyone ever tried to deliver CO2 with a CGA 300 regulator? I know that a CGA 320 regulator is standard for CO2. The issue is that I currently do not have any free CGA 320 regulators. I also...
25 February 2021 3,292 3 View
Respected Professor's i hope you are doing well and happy. i need some information about carbon Nanotubes. before blending the CNT with the matrix the CNT has been introducing in some treatments....
24 February 2021 5,383 5 View
I need to clean the hydrocarbon contamination on the carbon substrate of TEM grid. However, I heard that substrate could be broken by the powerful plasma. My substrate is pure carbon, with ~3nm,...
23 February 2021 3,262 5 View
Hi, me and my team mates are currently planning to pursue the topic of Activated Carbon from Coconut as a Water Filter. And we would like to ask for your suggestions and knowledge on what specific...
22 February 2021 6,569 3 View
21 February 2021 7,561 4 View