Do we need to use more sensors? or
More platforms such as UAV? or
More applications?
More publicity around the ability of photogrammetry to produce higher density and equal/higher quality point clouds than lidar in particular circumstances.
First of all, many thanks to the providers of free sources of remote sensing imagery and data such as Landsat and sentinel imagery. Yes this data can be used for commerical applications, but their...
05 June 2018 3,926 7 View
As is well known the main concern of the support vector machines (SVM) is to provide the maximum margin between different patterns; and when coupled with the kernels trick or modeling it will...
02 March 2018 731 8 View
I'm curious about the accuracy of the Free-Stationing function in Leica-1205 Total Station. I made a simple experiment by comparing the results from free stationing with their counterparts that...
05 June 2016 1,987 8 View
In terms of measurement: Could we make the following generic definition of Photogrammetry: "What You See What You Measure": WYS-WYM?
05 June 2016 3,906 0 View
As is well known, there are many places in Sudan that are covered with mesquite trees and they have undesirable effects such as depleting the groundwater storage. On the other hand they have some...
01 February 2016 7,804 3 View
04 May 2015 3,268 1 View
Is any one awrae of low cost hyper-spectral sensor that can be used agricultural applications?
04 May 2015 9,696 0 View
What is the deep connection between spatial resolution and positional accuracy in remote sensing images?
04 May 2015 8,851 0 View
In areas such as decision making, we can distinguish between art and science in terms of the mechanism that we use for decision. In other words is it a calculated decision or something else?
03 April 2015 690 2 View
Differences between the global geoid such as EGM2008 and the local geometrical geoid could reach more that 70 cm (here in Khartoum-Sudan). Now the question could we use the global geoid to guide...
03 April 2015 1,356 4 View
As we know, crop yield estimation has been done traditionally with farmer's expert knowledge, deductive sampling in representative areas, and remote sensing with satellite imagery. Farmer's Expert...
01 March 2021 3,468 3 View
I am trying to obtain the response and recovery times for my gas sensor device. It appears the the response/recovery times are primarily dependant on the flow rate of the gas I inject into the...
26 February 2021 1,511 3 View
24 February 2021 1,365 3 View
Hello, I have run into an issue that has sparkled a debate at work: is the LLOQ/ULOQ impacted by injection volume under the following circumstances: 1) Same dilution factor of all samples 2)...
23 February 2021 9,159 3 View
Dear Research Gaters, Let me first add context to the question. I am looking to simulate the waste management system and resources of a city. The hardware devices I need to simulate include,...
21 February 2021 2,333 4 View
Hi all, I have a question regarding calculations using the Pfaffl method. I have 3 groups per experiment: 1 control group (calibrator) and 2 treatment groups with 6 to 7 biological repeats per...
19 February 2021 8,351 2 View
My team is designing a dual channel microfluidic chip that runs air and water. I think we've decided on the NE1000 syringe pump for it's versatility and feedback control. We will be ordering the...
18 February 2021 9,928 2 View
Hello researchers! While studying the literature on refractive index sensors, most of the articles simulate their devices with a refractive index ranging from 1 to 1.1, with small steps in...
17 February 2021 1,578 4 View
Our team is designing a smart water C&C dashboard for a smart city initiative. As we look into the current smart water system landscape, we couldn't reconcile to a definitive solution that...
16 February 2021 1,094 3 View
I am working in the area of Handwriting recognition for Bangla. As there are many DL architecture, I am confused which one to select.
15 February 2021 4,996 1 View