Carbon (paper/cloth) is the conventional GDL material. But they are subjected to few limitations? What are their limitations and what possible alternative materials can be used to overcome the challenges of conventional GDL materials?
if we are doing non-invasive sensing in patient urine then require ethical permission or not??? If we have a consent form fill with the patient then it is sufficient or not???
24 May 2024 956 0 View
Hello all, I am currently in the process of conducting a chromosomal aberration test using whole blood samples to test toxicity of nanoplastics, and I have a question regarding the protocol. In...
17 March 2024 2,919 1 View
My CV profile shows redox peaks at around -0.3V in the potential window -0.7 to 0.3V. But in GCD, the discharge curve is not going below -0.25V. If the potential window of GCD is followed i.e....
29 January 2024 9,836 3 View
Can we partly cure Butyl rubber sealant formulation at room temperature in 10-15 days time. The purpose of adding a curing system in the formulation is to add the tensile in the product without...
24 January 2024 3,285 3 View
Hi Can anybody help us to know how we can make zinc disorbate ?
23 January 2024 3,884 1 View
Since its multidose injection, we have benzalkonium chloride as preservative in formulation. we knew that benzalkonium chloride also act as cationic surfactant. During stability, How to avoid the...
01 January 2024 2,610 3 View
In my study I have observed that the capacitance retention rate after 1000 charging-discharging cycles increased beyond 100%. can anyone kindly provide insight in this regard. Thank...
21 December 2023 2,848 1 View
The amount of reagents to be taken
02 December 2023 3,481 0 View
procedure of preparation
19 November 2023 4,483 1 View
brain tumor detection and classification
22 September 2023 5,109 1 View
I tried four trials of the same Copper Phosphides sample in Alkaline medium ( 0.5M KOH) with Hg/HgO reference electrode and Pt as counter electrode. I used 0.001 V/s scan rate for first three...
10 August 2024 3,628 1 View
How can I determine a good adhesion strength range for coatings on polymer surfaces, such as DLC on polymer substrates? Is there a specific threshold for adhesion strength (from T-peel tests)...
10 August 2024 940 3 View
I have carried out MFC experiments on three different volumes, 50, 500 and 1000 mL of wastewater. Results after MFC treatment shows that TDS and EC are more in larger volumes of water i.e. TDS and...
09 August 2024 9,621 0 View
How do interactions between the biosphere, the carbon cycle, and the water cycle impact global warming and interaction between the atmosphere and the hydrosphere?
09 August 2024 3,288 2 View
I am working in fungal fermentation of soybean meal and there is bacterial growth in them at times. I am trying to quantify fungal cell counts and bacterial cells; but I haven't been able to do at...
07 August 2024 7,535 4 View
Previously when I co-coluture anti-CD19(FMC63) CAR-Jurkat with Raji with E:T=5:1, Jurkat can eliminate Raji in 24h. However, when I test another CAR construct, although I can dectect totally CD69...
06 August 2024 639 2 View
Global ‘Weather’ has stopped, as ‘aqua thermionic instituted by the ‘Global thermo atmospherics has instituted global thermodynamics of 120º C + and thus all waters are, or have boiled into a...
06 August 2024 8,714 0 View
i have sorted anti-NP specific plasma cells from bone marrow of C57BL/6 mice at certain times after immunization with variable counts and isolated total RNA using TRIZOL method for RT-PCR using...
05 August 2024 8,835 1 View
Hello, everyone. I have tried to determine carrier motilities of some materials, by Density Functional Theory, using Quantum ESPRESSO. There are a few methods to do it, like a package called...
04 August 2024 8,891 1 View
Hi, I am isolating monocytes from the bone marrow using the Mouse Monocyte EasySep kit. I want to treat these cells and monitor expression of specific markers over the course of 10 days. I will...
04 August 2024 7,282 2 View